ZY-hosetube Pool Backwash Hose 2" × 100 ft — Heavy-Duty PVC Discharge, Reinforced Braided

ZY-hosetube's 2" × 100 ft heavy-duty pool backwash hose is a reinforced PVC discharge hose built to move large volumes of water quickly and resist abrasion, kinking, and leaks.

Keep pool maintenance simple and dependable with a backwash hose that pairs a rugged polyester braided outer jacket with a smooth, high-strength vinyl inner tube. This hose is designed to hook to standard 2" outlets for fast filtration backwash, pump discharge, or temporary drainage without collapsing under pressure. Lightweight for handling yet tough enough for repeated seasonal use, it folds flat for compact storage and arrives with two stainless clamps to get you connected fast.

How wide and compatible is this hose with my pool equipment?

The 2" measurement refers to the hose's internal diameter, matching common pool pump and pipe outlets up to a 2" OD. It connects easily to camlock or pin-lug fittings and can be clamped directly to PVC discharge spigots. Because it follows standard sizing, you won’t need specialty adapters in most setups.

• 2" inner diameter fits most pool backwash outlets and pump discharges
• Works with camlock/pin-lug fittings or standard PVC spigots
• Includes two clamps for a secure, leak-resistant connection
• 100 ft length reaches distant discharge points or safe runoff areas

How durable is the construction for repeated backwashing and outdoor use?

Durability combines a high-tensile polyester braided outer layer and a heavy-duty extruded vinyl inner lining. The outer jacket resists abrasion and tear while the inner wall remains smooth to promote efficient water flow and reduce clogging. Together they deliver resistance to bursting and prolonged service life when used and stored properly.

• Polyester yarn outer for abrasion and puncture resistance
• Extruded vinyl inner for toughness and leak prevention
• Engineered to withstand high water pressure during backwash cycles
• Flat-fold design minimizes kinking and eases storage

How easy is it to install, handle, and store this backwash hose?

Installation is straightforward: slide the supplied clamps over the hose, press the hose onto the outlet or fitting, then tighten the clamps. The hose is lightweight for carrying and maneuvering around pools and landscaping. When finished, rinse, drain, and fold it flat; this compact profile saves space and reduces stress on the material.

• Two included clamps speed up installation
• Lightweight construction for easier handling and positioning
• Flat-fold storage lowers space needs and prevents permanent bends
• Recommended to avoid prolonged sun exposure to extend service life

What maintenance tips help the hose last longer?

Rinse out residual debris and chemicals after each use, drain thoroughly, and fold flat before storing in a shaded, dry area. Avoid leaving the hose exposed to direct sunlight for long periods to prevent UV-related degradation. Check clamps and connections for tightness and inspect the jacket for abrasions or wear before each season.

• Flush with fresh water to remove sand and pool chemicals
• Drain fully and fold flat for compact, stress-free storage
• Keep out of direct sunlight to reduce vinyl and yarn breakdown
• Replace clamps if corroded and monitor for surface damage

Who is this for? ZY-hosetube's 2" × 100 ft heavy-duty pool backwash hose is ideal for pool owners, service technicians, and facilities managers who need a reliable, high-capacity discharge solution. It suits in-ground and above-ground pool systems, seasonal pool cleanouts, and any application requiring a long, durable hose that resists kinks and abrasion. If you want straightforward hookups, strong water throughput, and compact off-season storage, this hose offers a practical, long-lasting option without special adapters or installation tools.