Zonon 1" EMT Canopy Foot Pads — Galvanized Ground Plates for 1 3/16" OD Poles, 8-Pack, Eyebolt Clamp

Zonon short foot pads are galvanized steel fittings that secure 1" EMT canopy poles (outer diameter ~1 3/16") to the ground for stable, weather-ready outdoor shelters.

These compact ground plates are designed to anchor lightweight structures—canopies, small carports, garden shelters and more—without welding or complex hardware. Made from galvanized steel with a small inner sleeve and multiple mounting holes, each foot pad accepts a 1" EMT pipe and fastens tightly with an eyebolt. The set includes eight identical plates so you can outfit an entire frame or keep spares for future projects.

How do these foot pads attach to the pole and ground?

Each pad slips over the pipe and is secured using a tightened eyebolt that clamps the sleeve to the tube. The base plate includes pre-punched holes so you can stake, bolt, or screw the fitting to packed soil, wood, concrete, or pavers.

• Slide-on sleeve fits pipes with outer diameter about 1 3/16".
• Eyebolt tightens to lock the pole in place without welding.
• Tri-hole base accepts tent spikes, screws, or anchor bolts.
• Solid bottom prevents pole contact with ground and improves load distribution.

Will these withstand outdoor conditions and repeated use?

The foot pads are made from galvanized steel to resist corrosion and surface wear in outdoor environments. That zinc-coated finish extends usable life and reduces visible rust when exposed to rain, humidity, or seasonal storage.

• Galvanized surface for improved rust resistance.
• Welded eyebolt and plate for stronger mechanical connection.
• Durable under light-to-moderate loads typical of party canopies and garden structures.
• Easy to clean and store between seasons.

What pipe sizes and projects are compatible with these fittings?

These short foot pads are made to accept 1" EMT tubing with an approximate outer diameter of 1 3/16"; the internal sleeve measures about 1 1/4" to allow a snug, practical fit. They suit a broad range of DIY uses beyond pop-up tents.

• Designed for 1" EMT conduit with ~1 3/16" OD.
• Useful for canopies, umbrella or flag stands, light poles, and small shelters.
• Eight pieces included—enough for multi-leg frames or multiple projects.
• Simple installation removes need for specialized tools or fabrication.

How do I install and maintain these ground plates for best results?

Set the plate on a flat surface, slide the pole into the sleeve, then tighten the eyebolt to clamp the tube. Secure the base to your substrate with appropriate fasteners; for long-term outdoor use, check the fittings and retighten hardware seasonally.

• Use corrosion-resistant screws or anchor bolts for concrete decks and slab mounting.
• Stake through base holes for temporary setups on turf or packed soil.
• Inspect and retorque the eyebolt after strong winds or heavy use.
• Store indoors in winter to prolong galvanized finish life when possible.

Who is this for? If you build or assemble temporary or semi-permanent outdoor frames—event canopies, greenhouse extensions, carport supports, or signage poles—these compact, low-profile foot pads provide a straightforward way to anchor tubes without cutting or welding. They suit hobbyists, rental businesses, landscapers, and homeowners who want a corrosion-resistant, easy-to-install solution for securing 1" EMT poles. Note: dimensions are measured manually; allow for slight variation and confirm pipe outer diameter before purchase.