ZALANA 8" Replacement Wheel Kit for Honda HRN216 - 2 Front + 2 Rear Durable Plastic, Direct OEM Fit

ZALANA 8-inch replacement wheel kit restores mobility to compatible Honda HRN216 walk-behind mowers with an easy, bolt-on swap.

When your mower rides on cracked or worn wheels it pulls, vibrates, or becomes harder to steer — replacing the four wheels is a fast way to regain smooth handling. This ZALANA kit includes two front and two rear 8" wheels manufactured from durable plastic and sized to match Honda part numbers 44710-VR8-N00ZA (front) and 42710-VR8-N00ZA (rear). The set is designed for specific HRN216 model variants and comes ready to install so you can get back to mowing without buying a whole new deck or complex parts.

How do these replacement wheels fit my Honda HRN216 mower?

These wheels are created to match the dimensions and mounting style of the OEM parts they replace. They attach using the existing axle, nut, and drive engagement on compatible HRN216 submodels, so installation keeps your mower’s original drive geometry and clearance.

• Replaces front part 44710-VR8-N00ZA and rear part 42710-VR8-N00ZA
• Fits HRN216 VKA, VKAA, VLA, VLAA, VYA, VYAA model variants
• Not compatible with PKA/PKAA HRN216 push-mower versions
• Bore, width, and diameter sized to factory specifications for a direct swap

What are the wheel dimensions and construction?

Each wheel measures 8 inches in diameter with a 2-1/4" tread width and a 1/2" bore that accepts standard mower axles. The wheels are molded from a tough plastic compound intended to resist cracking, while the tread profile offers grip across typical grass, dirt, and light gravel surfaces.

• Diameter: 8 inches — matches OEM clearance and cutting height
• Width: 2-1/4 inches — stable footprint for smooth rolling
• Bore: 1/2 inch — for common mower axles and fasteners
• Material: high-strength plastic for impact resistance and longevity

How simple is installation and what tools do I need?

Installing the ZALANA wheels is straightforward: remove the retaining nut, slide the old wheel off the axle, position the new wheel, and resecure the nut. Most homeowners can complete the swap in minutes using only basic hand tools, making it a cost-effective way to revive your mower’s handling.

• Tools: socket or wrench to remove and tighten axle nut
• Procedure: remove hex nut, slide off old wheel, fit new wheel, tighten nut
• No special adapters or machining required when used on compatible models
• Package contains two front and two rear wheels for a full-axle refresh

Who is this for? Homeowners and landscapers who own one of the supported Honda HRN216 submodels and need a reliable, affordable wheel replacement will benefit most from this kit. It’s especially useful if your mower steers poorly, drops height on one side, or shows visible wheel damage. If you have a PKA/PKAA HRN216 push model, verify compatibility first — those variants require different wheel specifications.