WILLBOND Plant Anchor Kit — 80 Aluminum Vine Anchors (Silver) with Silicone Adhesive & Wire for Wall Trellises

WILLBOND Plant Anchor Kit is a complete wall-climbing plant fastening set that includes 80 aluminum vine anchors, silicone adhesive, garden tie tape, metal wire and wire cutters for secure, weather-resistant trellis installations.

This kit is designed for anyone who wants to train climbing plants onto brick, stucco or other outdoor walls without drilling. The package bundles multiple fixing options — reusable anchors, strong silicone glue, wire and tape — so you can tailor attachment style to plant type and wall surface. All metal anchors are rust-resistant and the silicone sealant cures into a firm bond after 24 hours, offering a low-impact, long-lasting solution for living walls and decorative trellises.

How do I attach these anchors to a stucco or brick wall?

Clean the mounting area, apply the silicone sealant to the anchor base, press the anchor onto the wall and hold for a short time. Allow 24 hours for the adhesive to harden fully before tensioning with wire or tape to avoid movement during curing.

• Surface prep: remove dust and loose material for best adhesion
• Sealant: use the included silicone adhesive at the anchor base
• Curing: do not move anchors during the 24-hour solidification period
• Load: after cure, anchors are ready for wire or tape tensioning

Which fixing option should I use — wire, tape, or both?

Choose metal wire when you need strong, slim support for heavier vines; pick garden tie tape for a softer, plant-friendly hold and cleaner appearance. Combining the two gives maximum flexibility: wire for structural support and tape where stems contact the anchor to prevent rubbing.

• Metal wire: thin, strong support for heavier growth
• Garden tie tape: gentler on stems and more discreet visually
• Combined use: wire for structure, tape at contact points
• Quantity: kit includes generous lengths of both for multiple plants

Will these anchors withstand weather and seasonal wear?

The anchors are made from weather-resistant aluminum to resist rust and maintain holding strength outdoors. Silicone adhesive is waterproof once cured, so properly installed anchors remain secure through rain and temperature changes.

• Anchor material: aluminum for corrosion resistance
• Adhesive: silicone sealant cures waterproof and firm
• Maintenance: occasional checks recommended after extreme weather
• Longevity: designed for seasonal outdoor use and long-term training

How many plants or how large an area can this kit handle?

The kit contains 80 vine anchors plus multiple fasteners and wire, enough for several small trellises or one large wall feature depending on anchor spacing. Plan anchor spacing every 6–12 inches for dense coverage or 12–24 inches for lighter trellis designs.

• Anchor count: 80 anchors suitable for multi-plant setups
• Spacing guide: denser for heavy climbers, wider for light vines
• Extras: included tape and wire support several runs
• Tools: wire cutters included for onsite adjustments

Who this is for: gardeners, landscapers and homeowners seeking a non-invasive method to train climbing plants on masonry or textured exterior surfaces. The WILLBOND Plant Anchor Kit is suited for people who want a ready-to-use assortment of anchors and fasteners for DIY living walls, rose supports, clematis training, ivy guidance and decorative trellis projects without drilling into the wall. It’s also useful for rental properties where reversible, adhesive-based attachments are preferred.