VOJSALDR 26V Replacement Charger for 21.6V SAT-3P6S Pool Cleaner Batteries — 2.2A Output, 2.7m Cord

This VOJSALDR 26V replacement charger powers compatible 21.6V Seauto Crab CR and Zyerch SAT30 robotic pool cleaner batteries for safe, reliable recharging.

If your pool cleaner battery has run down, a dependable charger restores operation quickly and safely. The VOJSALDR 26V charger is built specifically for 21.6V SAT-3P6S batteries used in Seauto Crab CR and Zyerch SAT30 cleaners, providing a stable 26V, 2.2A output and a long 2.7-meter cord. It includes multiple safety protections and industry certifications so you can charge with confidence.

Will this charger work with my Seauto Crab or Zyerch SAT30 cleaner?

Yes—when your cleaner uses the SAT-3P6S 21.6V lithium-ion battery, this VOJSALDR charger is compatible. It was designed as a direct replacement to match the battery chemistry and voltage range of those models. However, it is not suitable for other SAT-series models that use different battery specifications.

• Compatible models: Seauto Crab CR and Zyerch SAT30 with 21.6V (SAT-3P6S) battery.
• Not compatible with SAT10, SAT20, SAT25 or other non-21.6V variants.
• Output tailored to safely recharge 21.6V Li-ion battery packs.

How fast and safe is the VOJSALDR replacement charger?

The charger supplies up to 2.2 amps at a 26V output, balancing charging speed with battery longevity. Built-in intelligent protections monitor voltage, current, and short-circuit conditions to prevent damage during charging. It carries CE, FCC and RoHS indications of conformity to common safety and environmental standards.

• Output: 26V DC, 2.2A maximum for efficient charging.
• Over-voltage, over-current and short-circuit protection included.
• Safety-tested to relevant CE/FCC/RoHS parameters.

What are the practical details: power input, cord length, and warranty?

The charger accepts a wide range of mains power, 100–240V AC at 50–60Hz, so it works in many countries without an additional transformer. The power cord stretches 2.7 meters (about 8.8 feet), letting you reach outlets around your pool equipment without pulling the cleaner. VOJSALDR bundles a limited service policy so you have purchase protection if the unit is defective.

• Input range: 100–240V AC, 50–60Hz — worldwide-ready mains compatibility.
• Cable length: 2.7 meters (8.8 feet) for flexible placement near your pool area.
• Support: 30-day return disclaimer and 12-month exchange coverage.

How do I use the replacement charger safely and keep batteries healthy?

Always connect the charger to the battery and then to mains power following the cleaner manufacturer’s instructions. Avoid charging in direct sunlight or standing water and unplug once charging completes to minimize heat exposure. Store the charger indoors when not in use and inspect the cord and connector for wear before each use.

• Follow the cleaner’s charging steps: connect battery first, then apply mains power.
• Charge in a dry, shaded area; avoid poolside splashes and high heat.
• Unplug and disconnect when charging finishes to reduce stress on the battery.

Who this is for: Pool owners or service professionals who operate Seauto Crab CR or Zyerch SAT30 robotic cleaners and need a dependable, safety-focused replacement charging adapter. Choose this VOJSALDR unit if you want a certified charger built for the SAT-3P6S 21.6V battery specification, with a long cord and protective circuitry for regular pool-cleaning maintenance.