VIVOHOME 2110GPH Pond Filter — Pressurized Auto-Cleaning Bio Filter with 13W Lamp & Timer

The VIVOHOME 2110GPH Auto-Cleaning Pressurized Bio Pond Filter is a durable, high-flow pond filtration unit with automatic sponge cleaning and a built-in 13W clarifying lamp for clearer water with less hands-on maintenance.

This pressurized biological filter is built from weather-resistant ABS and engineered to handle large ornamental and koi ponds. It combines mechanical sponge pads and biological media inside a sealed housing, adds a timer-controlled lamp to help keep water clear, and includes an automatic cleaning mode that spins the internal motor to flush out debris. The unit is designed for outdoor use (IP44) and ships with multiple adapters to match common pond hose sizes.

How much pond can this filter handle?

The VIVOHOME 2110GPH model supports high flow rates and is sized for sizable garden water features. With a maximum rated flow of 2110 gallons per hour (about 8000 L/H) it pairs best with pumps up to 1850 GPH for efficient circulation. Recommended pond capacities vary by fish load and bio-demand, but typical guidance is provided below.

• Ornamental ponds up to ~2113 gallons (8000 L) under light stocking.
• Koi ponds up to ~1057 gallons with moderate stocking.
• Best pump pairing around 1800 GPH when pump head is ~10 ft (3 m).

How does the auto-cleaning system simplify maintenance?

The filter features an easy SWITCH between FILTER and CLEAN modes; activating CLEAN makes an internal motor rotate to scrub the sponge pads and expel trapped debris. A clear audible “beep” signals when cleaning is finished, and the modular lid and clip system allow quick access when deeper service is needed. Weekly checks and sponge rinses extend performance in busy ponds.

• Two coarse (20 PPI) and two fine (25 PPI) sponge pads for staged mechanical filtration.
• Automatic motor-driven sponge rotation in CLEAN mode; audible completion beep.
• Modular housing and detachable lid speed up manual maintenance when required.

What does the 13W lamp and timer add to pond clarity?

The integrated 13W lamp supports visual water clarity by reducing suspended algae and improving light-driven conditions; a three-position timer (0H, 12H, 24H) extends bulb life and lets you customize run time. A spare lamp and step-by-step replacement guide are included so you can swap bulbs without downtime. Using the timer avoids unnecessary lamp runtime while keeping water appearance consistent.

• Built-in 13W lamp with included spare bulb and replacement instructions.
• Timer settings: off, 12-hour cycles, or continuous 24-hour option.
• Timer reduces lamp wear while maintaining visual clarity when scheduled.

Will this fit my hoses and outdoor setup?

The unit ships with three interchangeable adapters (sizes 3/4", 1", 1¼", 1½") to match common inlet and outlet hoses, and clear inlet/outlet symbols simplify plumbing. For strongest performance, use an outlet hose at least one size larger than the inlet. The ABS housing is sun-resistant and the filter has an IP44 rating for outdoor protection from splashes and light rain.

• Three adapters for 3/4", 1", 1¼" and 1½" hose compatibility.
• Clear inlet/outlet markings and recommendation to upsized outlet hose for durability.
• Durable ABS body: heat-insulated, sun- and aging-resistant; IP44 splash protection.

Who is this for: Gardeners, pond hobbyists, and landscapers who need a robust, low-maintenance filtration solution for medium to large ornamental or koi ponds. It suits owners who want automatic sponge cleaning, staged mechanical filtration, and an integrated lamp to improve water appearance—especially where weather-resistant construction and flexible hose fittings are required.