VEVOR CC150 Pool Filter Cartridge Replacement — 150 sq.ft drop-in fit, 50‑micron filtration for Pentair R173216

VEVOR CC150 is a direct, high-capacity replacement pool filter cartridge built to match Pentair Clean & Clear 150 performance with 150 sq.ft. of trilobal pleated filtration.

Swap in the VEVOR HYPAP-150-4 cartridge to restore filtration on systems that use Pentair R173216, Pleatco PAP150, Unicel C-9415, or Filbur FC-0687 cartridges. Engineered to deliver fine-particle capture, reduced backpressure, and long service intervals, this third-party option combines EPA-certified materials, reinforced construction, and a design sized to match your existing CC150 housings and plumbing connections.

Will this cartridge fit my Pentair Clean & Clear 150 system?

Yes—this cartridge is manufactured to the same critical dimensions and inlet/outlet spacing as the CC150 family so it installs without plumbing changes. Confirm your old cartridge's length and diameter before ordering to ensure a correct fit.

• Nominal size: approximately 31 1/8 inches long (L) by 10 1/16 inches outer diameter (OD).
• Compatible cross-references: Pentair R173216, Pleatco PAP150, Unicel C-9415, Filbur FC-0687.
• 6-inch inlet/outlet diameter matches standard Clean & Clear 150 ports.
• Designed for direct drop-in installation—no adapters required.

How well does the VEVOR CC150 cartridge trap debris and keep water clear?

The cartridge uses trilobal pleated media to increase surface area and capture particles down to roughly 50 microns, improving clarity while lowering clogging frequency. That construction also balances filtration efficiency with flow, so your pump won’t work harder than necessary.

• Trilobal pleated fiber boosts dirt-holding capacity for longer runs between cleans.
• Approximately 50-micron filtration captures fine sediment, hair, and plant debris.
• Uniform pleats release trapped material easily during rinsing.
• EPA-certified materials for safe contact with pool and spa water.

What durability and maintenance features should I expect?

This cartridge is built with a reinforced inner core and PA+GF end caps to resist pressure and mechanical wear. Regular rinse-and-rotate cleaning restores much of the filtering ability, and the robust construction supports multiple cleaning cycles, making it a cost-effective replacement option.

• Pressure-resistant internal core reduces collapse risk in higher-flow systems.
• PA+GF (polyamide + glass fiber) end caps provide chemical and mechanical resistance.
• Reusable pleated media for multiple rinse cycles before replacing.
• Uniform fiber structure simplifies hosing and maintenance tasks.

Will installing this cartridge change my pool’s performance or require other upgrades?

Installation is intended to be straightforward and should not require modifications to your filtration setup. Performance will align with original CC150 expectations when matched correctly by size; monitor pressure gauges after first run to confirm normal operating range.

• Drop-in replacement—no new plumbing or adapters typically needed.
• Check filter pressure after installation; record baseline for cleaning intervals.
• If your system is old, inspect housing and seals while replacing the cartridge.
• Regular rinsing helps maintain flow and extends service life of the cartridge.

Who this is for: Pool and spa owners with Pentair Clean & Clear 150 or interchangeable cartridge systems who want a reliable, EPA-certified replacement that balances fine filtration with easy cleaning and durable construction. It suits homeowners and service professionals seeking cost-effective maintenance parts that fit standard CC150 housings without plumbing changes.