VEVOR 4x4 Pergola Bracket Kit — 3.62x3.62 in Inner, 4pc 3‑way Heavy‑Duty Black Powder‑Coated Brackets

VEVOR's 4x4 pergola bracket kit is a complete heavy-duty metal mounting system that protects, connects, and anchors 4x4 wooden posts for pergolas, gazebos, patios, and log cabins.

Built to simplify outdoor timber projects, this kit includes four three-way corner brackets, four post base brackets, and a full set of screws and anchors. Each bracket fits posts with an actual outer dimension of 3.5 x 3.5 in and an internal opening of 3.62 x 3.62 in, giving you a snug, weather-resistant fit. Constructed from 2 mm carbon steel with a black powder coat, the hardware is designed for everyday outdoor exposure while offering drainage and reinforced joints for long-term stability.

How does the VEVOR pergola bracket kit protect wooden posts outdoors?

The brackets fully enclose the bottom and corner sections of posts to prevent direct contact with wet surfaces and sun exposure that accelerate decay. The full-coverage design channels water away and the built-in drainage holes let moisture escape instead of pooling against the timber.

• Full-coverage boot shields post sides from rain and sun.
• Drainage holes reduce trapped moisture and rot risk.
• Black powder coating resists corrosion for extended life.
• 2 mm carbon steel resists deformation under load.

Will these brackets hold up heavy pergola beams and sails?

Yes — the three-way corner brackets and base plates are reinforced with a 90° boot structure for improved rigidity and load distribution. The kit includes longer stainless steel expansion anchors to secure posts to concrete or wood foundations, improving resistance to wind and structural movement.

• Reinforced 90° corners prevent twisting and deformation.
• 60 mm stainless expansion anchors for firm concrete mounting.
• Multiple screw points give strong mechanical fixation.
• Integrated sail-hanging holes allow secure shade attachment.

How easy is it to install on a typical patio or gazebo project?

Installation is straightforward: cut the posts to length, slide the bracket boots over the ends, tighten the supplied screws, then fasten the base plates to your surface. The kit contains all primary hardware so you can assemble a four-post structure with common tools in a single session.

• Includes corner brackets, base brackets, and mounting screws.
• Slide-in design fits 3.5 x 3.5 in posts without complex carpentry.
• Screw anchors provided for wood and concrete mounting.
• Accessible design allows later removal for maintenance.

Can I attach a shade sail or removable canopy to these brackets?

The three-way brackets include pre-punched holes positioned for hanging a shade sail or tie-down hardware. These holes let you fasten ropes or carabiners directly to the bracket, creating a clean attachment point that keeps fabric off the wood and simplifies seasonal removal.

• Built-in hanging holes for sunshade sails and hardware.
• Holes positioned to avoid concentrated stress on the post.
• Removable fasteners allow easy fabric removal for cleaning.
• Use stainless anchors and marine-grade fittings for coastal use.

Who is this for? The VEVOR 4x4 pergola bracket kit is made for DIYers, landscapers, and small contractors who want a fast, durable way to raise and protect 4x4 posts on patios, deck roofs, pergolas, gazebos, and small cabins. It suits projects where protecting wood from ground moisture and creating reliable attachment points for beams or shade sails matter, and for anyone seeking an all-in-one hardware set that fits standard 3.5 x 3.5 in posts without custom metalwork.