Vetoper 18-inch Chainsaw Chain 3-Pack (.325" Pitch, .063" Gauge, 68 Drive Links) for Stihl Pre-2023 Models — Hardened, Chrome-Plat

Vetoper's 3-pack 18-inch replacement chainsaw chains are .325" pitch, .063" gauge with 68 drive links engineered to fit Stihl pre-2023 models like 025, MS250 and MS251.

Replace worn or damaged chains quickly with this set designed to restore cutting performance on compatible Stihl saws. Each chain combines hardened components and a protective chrome finish to resist wear, while heat-treated cutters and rivets help maintain sharpness and reduce vibration during demanding jobs. These chains are sold as a convenient three-pack so you have spares ready for prolonged use or to rotate between jobs.

Will this chain actually fit my Stihl saw?

If your Stihl model is listed as a pre-2023 configuration and uses .325" pitch, .063" gauge with 68 drive links, this chain is built to match those dimensions. Always confirm the pitch, gauge and number of drive links printed on your saw or in the owner’s manual before purchase.

• Designed for .325" pitch, .063" gauge, 68 drive links
• Compatible models include Stihl 025, MS250, MS251, part number 3005 008 4717-36390050068 (pre-2023)
• Check your saw bar marking or manual for exact specs before ordering

How does the chain hold up during heavy cutting?

These chains use hardened rivets and a hard chrome plating that increase resistance to wear and abrasion, prolonging cutter life under heavy loads. Heat treatment and deep quenching improve toughness, helping the cutters retain edge geometry and cut smoothly through thick or dirty wood.

• Industrial-grade hard chrome plating for abrasion resistance
• Hardened rivets to prevent premature failure under stress
• Heat-treated cutters for consistent edge retention and reduced vibration

What performance and safety standards are addressed?

These chains have been evaluated to meet established kickback performance criteria from industry standards, supporting safer operation when used and maintained properly. Proper fitment, correct tensioning and using recommended bar and sprocket combinations are still essential for safe cutting.

• Tested against ANSI and CSA kickback performance benchmarks
• Reduced vibration design for steadier handling
• Sold as a three-pack so you can swap chains before edges degrade

How should I maintain and install these chains for best results?

Install the chain with the cutter teeth facing forward along the bar and tension it to the manufacturer’s specification to avoid derailment. Regularly sharpen cutters, keep the bar groove and sprocket clean, and maintain proper lubrication to extend life and preserve cutting performance.

• Fit with cutter teeth pointing in the cutting direction on the bar
• Tension according to your saw’s manual and recheck after a few cuts
• Keep chain oil topped up and sharpen when cutting slows or drags

Who is this for: This 3-pack suits homeowners, landscapers and professional cutters who own compatible Stihl pre-2023 saws and need durable, ready-to-install spare chains. It's a practical purchase if you want to minimize downtime on job sites, maintain steady cutting performance across long projects, or have multiple saws requiring identical chain specs. If you’re unsure about compatibility, provide your saw’s model and bar markings to confirm fit before ordering.