URYKEC Electric Fence Charger PE2 – 0.10 Joule Plug-In Energizer for 2 Miles/8 Acres, 110V, Indicator Lights

The URYKEC Electric Fence Charger PE2 is a plug-in energizer that delivers 0.10 joule of output to protect up to 2 miles (about 8 acres) of fencing for dogs, chickens, livestock, and pest control.

Compact and user-friendly, the PE2 is designed for small farms, poultry coops, and perimeter deterrence where a reliable low-energy pulse is needed. It runs on 110V AC, includes clear indicator lights, and pairs with standard fence testers or voltmeters to confirm proper installation. The unit balances safety and effectiveness for boundaries, animal containment, and nuisance animal management while offering straightforward troubleshooting and a one-year warranty.

How much area and fence length will this charger cover?

The PE2 provides a 0.10 joule output rated to cover up to 2 miles of wire, which equates to roughly 8 acres under typical conditions. Actual coverage depends on fence type, number of conductors, vegetation contact, and soil conductivity. Keep the fence clear of heavy vegetation and use appropriate insulators to approach the rated distance.

• Covers up to 2 miles of continuous wire or about 8 acres of perimeter fencing.
• Single- or multi-wire systems possible; performance varies with wire count.
• Reduced range if fence has heavy vegetation or poor grounding.

How do I install and check the charger works?

Installation is plug-and-play for the power side but requires correct grounding and connections for reliable output. Plug the unit into a 110V AC outlet, connect a good ground system, and attach fence wire to the output terminal. Use a digital voltmeter or a fence tester to confirm voltage between the fence and ground terminal is greater than 400V as a basic functioning check.

• Plug into standard 110V AC; indicator light shows power status.
• Connect ground rods and fence output per the included manual.
• Verify output with a fence tester or digital voltmeter (target >400V).
• If light is on but voltage absent, inspect ground connections and wiring.

What maintenance and weatherproofing steps keep the fence reliable?

Routine inspection prevents most issues: keep joints sealed against moisture, remove vegetation contact, and check insulators and terminal screws. Seal wire joints with epoxy or tar to protect against corrosion and water ingress. Post warning signs near gates or public access points as part of a safe, compliant installation.

• Seal connections with epoxy or tar to reduce moisture damage.
• Trim vegetation and clear branches that touch the fence wire.
• Inspect ground rods, insulators, and terminal tightness periodically.
• Install visible warning signs at access points for safety compliance.

Who is this for: The URYKEC PE2 is well suited for small-scale livestock owners, backyard poultry keepers, dog owners needing a perimeter barrier, and hobby farmers who want a simple plug-in energizer for predator or pest control. It fits users who need a dependable, low-energy electric fence solution with easy setup, clear status indicators, and on-hand customer support. Choose this unit when you want straightforward protection across modest acreages without the complexity of high-power systems.