TUIXILET Diving Board Fulcrum Pad FC-100A with 67-209-911-SS Bolt Kit — Vulcanized Pad & Stainless Bolts

The TUIXILET FC-100A fulcrum pad and 67-209-911-SS bolt kit replace worn diving board mounting hardware to restore secure, long-lasting performance.

If your pool's diving board shows play at the fulcrum, corroded bolts, or a cracked pad, this replacement assembly restores the mechanical interface between board and stand. The kit includes the FC-100A U-frame fulcrum cover and a complete bolt set (67-209-911-SS), engineered to fit common SR series boards and 1.90" OD tubular stands. Materials and a vulcanized assembly method are chosen for improved durability versus older factory parts.

Will this kit fit my diving board and stand?

The TUIXILET assembly is designed to be compatible with many SR-series boards (6', 8', 10', 12') and stands that accept 1.90" outside-diameter tubing. Confirm your stand model number or measure tube OD before ordering to ensure a proper match.

• Compatible stand numbers: UF-12-100, UF-14-101, UF-18-101, UF-18-102, UF-24-103, UF-24-102.
• Intended for boards labeled SR in lengths 6'–12'.
• Measure stand tubing for 1.90" OD to verify fit.
• Contact seller if your model number is not listed for compatibility guidance.

How durable are the fulcrum pad and bolts?

TUIXILET uses a vulcanization process for the fulcrum pad assembly that increases resilience and resists cracking under repeated loads. The bolt kit is supplied as a complete stainless-steel replacement set to resist corrosion in pool environments when installed correctly.

• Vulcanized pad construction for increased wear resistance.
• Stainless components in the bolt kit to reduce rusting.
• Designed to handle normal diving board stresses when properly mounted.
• Recommended regular inspection for safety over time.

Is installation difficult and what tools are needed?

Installation is straightforward for anyone comfortable with basic hardware replacement: remove the old fulcrum pad and bolt hardware then fit the new FC-100A U-frame cover and torque the included fasteners to secure the board. No specialized fabrication is required, but standard wrenches and a torque wrench are recommended for a safe installation.

• Remove old pad and clean mounting surfaces first.
• Use common wrenches and a torque wrench to tighten bolts to manufacturer specs.
• Check alignment and board movement after installation; re-torque if necessary.
• If unsure, consult a pool technician for safe mount verification.

What exactly comes in the package?

The kit includes one FC-100A U-frame fulcrum cover and one 67-209-911-SS diving board bolt set, providing a ready replacement for the fulcrum interface and its fasteners. The parts replace like-for-like components on compatible stands so you receive both the wear surface and the hardware needed to reinstall the board.

• FC-100A Pool Diving Board U-frame Fulcrum Cover ×1.
• 67-209-911-SS Diving Board Bolt Kit ×1 set.
• Packaged for direct swap with compatible SR-series boards and specified stands.
• Instructions: remove old parts, fit new pad, secure bolts, inspect movement.

Who is this for: Pool owners, facility maintenance staff, and dive-stand technicians who need a trusted, heavy-duty replacement fulcrum assembly for SR-series diving boards. If you maintain a domestic or commercial pool with a compatible stand and want a durable, vulcanized pad plus a corrosion-resistant bolt set, this TUIXILET kit is built for routine maintenance and reliable replacement. Always confirm compatibility with your stand model or tube diameter before ordering and follow safe installation practices.