TIROAR Swimming Pool Water Jet Connector Kit for Intex Easy Set & Prism Pools – 1.25" Fittings, Inlet/Outlet Strainers

The TIROAR 25022E Swimming Pool Water Jet Connector Kit is a complete inlet and outlet assembly that restores circulation for Intex Easy Set and Prism-style above-ground pools using 1.25" pump hoses.

If your above-ground pool is losing circulation or you need to replace worn fittings, this kit supplies the common components used on many 16ft-and-smaller Intex pools. It bundles inlet and outlet connectors, strainer grids, a jet nozzle and hole plugs so you can rebuild both ports without sourcing parts one by one. The kit is designed for 1.25-inch pump hoses and is sold as a direct replacement assembly for typical Easy Set and Prism pool models.

Which pool models and sizes does this set fit?

This TIROAR kit is compatible with Intex above-ground pools, including Easy Set and Prism series models, and is intended for pools 16 feet diameter and under. Always match your existing fitting diameter and port shape before ordering to ensure a correct fit. If your pool uses larger hoses or non-Intex proprietary fittings, this kit will not be compatible.

• Designed for Intex Easy Set and Prism-style pools
• Fits pools up to 16 ft diameter
• Uses 1.25" pump hose connections
• Not suitable for larger-diameter hoses or non-compatible OEM ports

What parts are included and how do they restore circulation?

The set contains the most common components for both inlet and outlet ports so you can rebuild a complete circulation pathway. Replacing clogged or cracked strainers, worn connectors, or missing hole plugs prevents debris from blocking flow and restores a tighter seal between hose and port. That helps your filter pump move water efficiently through the pool again.

• 2 strainer connectors (11070) for 1.25" pump hose
• 1 inlet strainer connector (12365) and 2 strainer grids (11072)
• 1 inlet jet nozzle (12364) to direct return flow
• 3 hole plugs (10127) for unused strainer openings

How difficult is installation and what tools do I need?

Installation is a straightforward homeowner task that often takes less than an hour for both inlet and outlet ports. Typical steps include draining a small area around the port, removing the old fittings, seating the new connectors and grids, and reattaching the pump hose. Basic hand tools and plumber’s silicone or pool-safe gasket lubricant help ensure a watertight seal.

• Estimated install time: 30–60 minutes for both ports
• Tools: screwdriver, pliers, cloth, optional silicone sealant
• Work on a partially drained, level section of pool wall for safety

How do I confirm this is the correct replacement before buying?

Measure the existing hose diameter and compare port shape to the product images or your pool manual. This kit requires 1.25-inch pump hose connections; if your hoses or ports differ, choose the matching replacement. Also verify your pool manufacturer and model line (e.g., Intex Easy Set or Prism) to avoid mismatched parts.

• Check hose diameter: should be 1.25 inches
• Match port style to photos or manual illustrations
• Contact seller with photos if uncertain before purchase

Who is this for? Pool owners with Intex Easy Set or Prism-style above-ground pools up to 16 feet who need a reliable, all-in-one replacement for worn inlet and outlet fittings will benefit from the TIROAR 25022E kit. It suits DIYers who want to restore circulation without ordering multiple separate parts. If your pool uses larger hoses or custom OEM fittings, look for a size-specific kit instead.