Timyrimy 35.4in Garden Swing Replacement Rods — Black 2-Pack, 19mm Powder-Coated Metal

Timyrimy replacement rods are a pair of 35.4-inch (90cm) black powder-coated metal round rods designed to reconnect a hanging swing seat to its frame safely and weather-resistently.

If your outdoor swing’s connecting rods are bent, rusted, or missing, these Timyrimy rods restore a secure link between seat and frame with a simple swap. Each pack includes two identical rods finished in black powder coat to resist corrosion and blend with most swing frames. Before ordering, compare your current rod length, hole placement, and diameter to make sure the replacement matches your swing’s hardware and maintains correct seat balance.

How do I confirm these rods will fit my swing?

Measure three key dimensions on your original rod: overall length, the rod diameter, and the hole diameter and orientation. The Timyrimy rods measure 35.4 inches (90 cm) long, 0.75 inches (19 mm) in rod diameter, and have a 0.39-inch (10 mm) hole positioned on the same side as shown. If your existing front rod is shorter than the rear, keep that arrangement for the original seat angle.

• Length: 35.4 in / 90 cm — compare to your current rod length
• Rod diameter: 0.75 in / 19 mm — must match the hardware sleeves/holes
• Hole size: 0.39 in / 10 mm — check pin/bolt diameter compatibility
• Hole orientation: both holes aligned on the same side — confirm with your swing

What materials and finishes protect these rods outdoors?

These rods are made from sturdy metal and finished with a black powder coat that slows corrosion and hides wear for longer outdoor life. The coating helps resist moisture and UV exposure better than bare metal, reducing routine maintenance and preserving appearance. The solid round profile also delivers predictable strength across the length of the rod.

• Material: heavy-gauge metal for durable load-bearing
• Finish: black powder coat for corrosion resistance
• Shape: round 19 mm diameter for consistent strength
• Packaging: sold as a set of two rods per carton

Will changing rod length affect how my swing sits?

Yes — rod length directly changes seat height and balance. A longer replacement rod lowers the seat and can increase recline if used at the front; a shorter rod raises the seat. For best comfort and stability, match the original front-to-back length relationship: front rod length is generally equal to or shorter than the rear rod for proper seating angle.

• Longer rod: seat hangs lower and may tilt backward
• Shorter rod: seat sits higher and may tilt forward
• Match front/back relationship for original balance
• Measure both rods before swapping to maintain seating geometry

How easy is installation and what hardware do I need?

Installation is straightforward for anyone familiar with basic swing hardware: remove the old rods, slide the Timyrimy rods into the frame and seat connection points, and secure with bolts or pins that fit the 10 mm holes. Use the same bolts or pins from your original setup if they match the hole diameter. If new fasteners are needed, choose weather-resistant bolts or stainless steel pins sized for 10 mm holes and appropriate thread fit.

• Remove old rods, inspect frame and seat brackets
• Insert replacement rods into matching brackets
• Secure using 10 mm-compatible bolts/pins (not included)
• Check swivel and seat balance after installation

Who this is for: homeowners and maintenance professionals with hanging garden swings that need a matched-length, corrosion-resistant replacement link. These rods suit people who prefer a simple, component-level fix instead of replacing whole swing assemblies, and anyone who measured their original hardware and needs a reliable pair of 90 cm black metal rods to restore proper seating height and stability.