The Mower Shop HRR216 Complete Wheel Set for HRR216K10/K11 (Serial MZCG-1140001+) — 2 Rear Drive + 2 Front Idle, OEM Replacement

If your HRR216K10 or HRR216K11 mower (serial number MZCG-1140001 and higher) needs a full wheel refresh, this kit from The Mower Shop restores mobility, traction, and accurate tracking using authentic OEM components. The set combines rear drive wheels engineered for traction with front idle wheels for smooth steering, plus a service decal so you can record the installation date for future maintenance tracking.

What exactly is included in this wheel set, and are these original parts?

The kit contains four genuine wheels made to Honda specifications: two rear drive wheels (part 42710-VL0-T00ZA) and two front idle wheels (part 44710-VL0-T00ZA). You also get The Mower Shop date-of-service decal to mark when the replacement was installed.

• Two rear drive wheels 42710-VL0-T00ZA for traction and durability
• Two front idle wheels 44710-VL0-T00ZA for steering stability
• One service decal to record installation date
• Packaged as a ready-to-install set to replace all four wheels

How does replacing all four wheels help my HRR216 perform?

Installing matching front and rear wheels prevents uneven wear and improves tracking so the mower cuts straighter and feels more stable. Matching tread and diameter across all wheels reduces wheel hop and stress on the mower’s drive components.

• Restores even tire circumference to prevent pulling or drift
• Improves traction on varied turf for consistent speed
• Reduces vibration and stress on axles and drive cable

Will this set fit my mower model and how do I verify compatibility?

This complete wheel set fits HRR216K10 and HRR216K11 models with serial numbers MZCG-1140001 and higher. Check your mower’s serial plate—usually on the deck or under the engine—then confirm the number meets or exceeds MZCG-1140001 before ordering.

• Compatible models: HRR216K10, HRR216K11
• Required serial: MZCG-1140001 or higher for guaranteed fit
• Includes OEM part numbers for cross-referencing service manuals

How easy is installation and what tools or steps are needed?

Replacing the four wheels is a straightforward DIY job for most users with basic tools: a socket set, pliers, and possibly a torque wrench. Remove the old wheels, slide the new wheels onto the axles, and secure them with the original fasteners following torque specs in your service manual.

• Typical tools: socket wrench, pliers, flathead screwdriver
• Follow OEM torque specs and secure clips or nuts firmly
• Allow 10–30 minutes per wheel for removal and installation

Who is this for: This wheel set is designed for HRR216 owners, home landscapers, and small-property maintenance pros who want a complete, OEM-quality wheel replacement to restore handling and reliability. Choose this kit when multiple wheels show wear, cracking, or when you prefer the assurance of matching parts over piecemeal replacements. The included date-of-service decal helps track maintenance intervals for resale value or preventative care.