SuperHandy Replacement Chipper Blades for Landworks LCE06/GUO019 - 2-Pack CR12Mov, 39.5° Edge

These two precision-engineered SuperHandy replacement blades fit Landworks and SuperHandy 3-in-1 wood chippers (models LCE06 and GUO019) to restore chipping, shredding, and mulching performance.

When your chipper's cutting performance drops, swapping in a matched blade set is the fastest way to regain efficient mulch production. These replacement blades are sized and drilled to match the Landworks LCE06 and GUO019 rotors, made from hardened CR12Mov steel with a black oxidized finish and oiled surfaces to resist corrosion during storage.

How do these blades match my Landworks or SuperHandy chipper?

Each blade measures 3.5" long by 1.375" wide and 0.25" thick with a center-to-center hole spacing of 1.5" to fit OEM mounting patterns. Bolt hole inner diameter and outer edge dimensions align to the chipper's rotor mounting, and the blades use a 12.9 flat hex socket drive pattern.

• Dimensions: 76.2mm x 34.9mm x 6.35mm
• Hole sizes: inner Ø9mm, outer edge Ø20mm
• Mounting: two M8x25 bolts per blade (bolts sit on a 12.9° slant)

What makes the material and edge design reliable for mulching?

These blades are manufactured from CR12Mov, a wear-resistant steel grade selected for durability under repeated impacts from wood and green shrub material. A black oxide finish plus an oil coating helps prevent surface rust during storage and handling, while the cutting face angle optimizes chip formation without aggressive tooth geometry.

• Steel type: CR12Mov for long-term edge retention
• Finish: black oxidized with protective oil coating
• Edge angle: 39.5° for consistent chipping action

How do I install and use these replacement blades safely?

Installation requires two M8x25 bolts per blade to clamp the blade onto the rotor; note the factory-style bolt seating is angled at 12.9 degrees. Always power off, disconnect the spark plug or fuel source, and use hand and eye protection during blade replacement and machine maintenance.

• Fastening: two M8x25 bolts each, not included with some kits — check your package
• Safety: disconnect power and wear protective gear when installing
• Use: intended for wood, branches, and natural yard waste only (not rock or metal)

Will these blades affect the chip quality or machine balance?

Replacing worn blades with correctly sized, matched blades restores cutting geometry and promotes consistent chip size and feeding. Because the blades are manufactured to the chipper's OEM tolerances, they maintain rotor balance when installed in matched pairs or full sets.

• Chip size: returns to intended shredding and mulching performance
• Balance: precision hole spacing and weight (approx. 0.28 lb per blade) preserve rotor equilibrium
• Longevity: wear-resistant steel delays dulling and reduces replacement frequency

Who is this for: This two-blade set is ideal for homeowners, landscapers, and rental operations using Landworks LCE06 or SuperHandy GUO019 3-in-1 chippers that need a quick, compatible blade replacement. Choose this set if you want OEM-fit blades made from durable CR12Mov steel with a rust-resistant finish for reliable mulching of wood and garden debris. These blades are not intended for processing stone, metal, or concrete — use them only for appropriate yard and forestry materials and always follow safety procedures during maintenance and operation.