Stens replacement deck belt for Exmark ZTR 60" deck 265-060 — covered OEM-fit

Stens 265-060 is a covered replacement engine-to-deck belt designed to restore reliable power transfer for Exmark zero-turn mowers with a 60" deck, replacing OEM part 103-4014.

When your Exmark ZTR's deck drive belt shows wear, cracking, or slipping, the right replacement part gets the mower back to cutting performance without downtime. This Stens OEM-compatible belt is built to the same length and width specifications as the original so it routes and tensions correctly on 60" decks. It ships in a branded sleeve and is sized to match factory routing for a straightforward swap.

How does this belt match the original Exmark part?

The Stens 265-060 mirrors the critical dimensions and covered construction of Exmark part 103-4014, so it fits the same pulleys and idlers. Its covered design helps resist debris and abrasive wear compared with raw belts. You can expect the same belt path and tension points used in factory installations.

• Exact length: 116 inches for correct routing
• Width: 5/8 inch to match pulley groove
• Covered belt type for debris protection
• Packaged in a branded sleeve for easy identification

What tools and steps are needed to install it?

Installation is a routine maintenance task for most service techs and mechanically inclined owners. Basic hand tools—socket set, wrenches, and a pry bar or belt tensioner tool—are usually sufficient to remove the old belt and re-route the new one. Always support the mower and follow manufacturer safety procedures before working under or around the deck.

• Tools: sockets, wrenches, belt tool or pry bar
• Procedure: disengage blades, lift deck, release tension, remove and replace belt
• Check alignment and tension before first use
• Follow Exmark safety steps and disconnect power source

How will this belt affect mower performance?

Using a correctly sized covered belt keeps consistent power transfer between the engine and mower deck, reducing slippage and uneven cutting. A fresh belt helps restore blade speed and even cutting height, while the covered design reduces premature wear from grit and grass. Replacing worn belts prevents extra stress on pulleys and bearings.

• Improves blade speed consistency
• Reduces slipping and burnt-rubber odors
• Protects against abrasive debris for longer life
• Helps maintain even cutting and reduced vibration

Will this belt fit my specific Exmark model?

This belt is specified for Exmark zero-turn models equipped with a 60" mowing deck that originally used part number 103-4014. Confirm your parts manual or existing belt part number before ordering to ensure compatibility. If your mower uses a different deck width or belt routing, select the belt that matches those specifications.

• Designed for Exmark ZTR with 60" deck
• Direct replacement for Exmark 103-4014
• Verify deck size and current part number first
• Contact dealer if your mower has nonstandard configurations

Who is this for: Lawn care professionals, landscapers, and owners of Exmark zero-turn mowers who need a reliable, OEM-compatible deck drive belt to maintain cutting performance. It’s ideal for anyone replacing a worn or damaged engine-to-deck belt on a 60" deck who wants a covered belt built to original dimensions for straightforward installation and dependable service.

• Feature: Sold on Amazon