Skyflame Propane Burner Connection Kit — 60 in Hoses, Adjustable 0–30 PSI Regulator, Brass Fittings

Skyflame LP Burner Connection Kit is a complete propane hose and regulator assembly designed to safely connect a 20 lb BBQ-style LP tank to fire pits, burners, and outdoor propane appliances.

This Skyflame kit bundles the essential replacement parts you need to get a propane fire feature working reliably: a 60-inch hose with QCC-1 (Type-1) tank fitting, a second 60-inch hose for the appliance end, a 1/2" straight gas key valve, a 1/2" 150K BTU air mixer valve with brass adapter, and an adjustable 0–30 PSI regulator with a red control knob. Components are built from durable rubber hoses and brass fittings for weather resistance and a tight, leak-resistant connection. The setup is intended solely for propane (LP) systems and is ideal when replacing worn lines, upgrading controls, or adding a regulated flame adjustment to an outdoor fire pit or heater.

How does this kit improve the safety and reliability of a propane fire pit?

The Skyflame kit uses robust brass fittings and reinforced rubber hoses to minimize leaks and resist outdoor wear. The included on-off gas key valve provides a positive shutoff while the regulator lets you control pressure safely before the appliance. Proper installation and periodic leak testing are still required.

• Brass adapters and fittings for corrosion resistance and a tight seal
• Reinforced rubber hoses rated for outdoor use and pressure
• On/off gas key valve for immediate isolation of the fuel line
• Adjustable 0–30 PSI regulator to set safe operating pressure

What components are included and how do they connect?

The kit is delivered with everything needed to link a standard 20 lb propane tank to your burner: two 60" hoses, regulator, air mixer, brass adapter, and a straight gas key valve with a 3" key. Connections are standard: Type-1 (QCC-1) tank connection to regulator, regulator to hose, and hose to the fire pit or appliance via the mixer and adapter.

• 60" hose with Type-1 (QCC-1) tank fitting for common BBQ tanks
• 60" appliance hose for routing to the burner or fire pit
• 0–30 PSI adjustable regulator with red knob for pressure control
• 1/2" 150K BTU air mixer and 1/2" straight gas key valve included

How do I adjust the flame and ensure correct pressure?

The red knob on the regulator lets you fine-tune output between 0 and 30 PSI to achieve the desired flame height or heat. Always start with the regulator at 0 PSI (off) when connecting, then slowly increase pressure while checking for proper flame behavior and leaks using a soap solution or approved leak detector.

• Begin at 0 PSI before turning on tank valve
• Increase regulator slowly while observing flame stability
• Perform a leak test at each connection before first use
• Do not exceed appliance manufacturer pressure recommendations

Which appliances and situations is this kit suitable for?

This assembly is designed for outdoor LP applications: vented fire pits, fire pit tables, outdoor fireplaces, heaters, and other propane appliances that accept a 1/2" inlet and use a Type-1 tank connection. It is not compatible with natural gas systems.

• Vented and marketed propane fire pit bowls and burners
• Fire pit tables and outdoor patio fireplaces
• Portable propane heaters and similar LP appliances
• Replacement or upgrade for worn hoses and regulators

Who is this for? The Skyflame LP Burner Connection Kit is aimed at homeowners and outdoor-living DIYers who need a reliable replacement or upgrade for their propane fire feature. It’s also appropriate for installers and hobbyists who prefer having a full hose-regulator-valve assembly for retrofits, seasonal replacements, or when adding precise flame control to existing propane appliances. Always follow appliance instructions, local codes, and safe-gas installation practices when installing or adjusting the system.