Sepetrel Pool Backwash Hose 1.5" x 100 ft — Heavy-Duty Lay-Flat, Burst-Resistant with Metal Clamps

Sepetrel Pool Backwash Hose is a 1.5-inch by 100-foot heavy-duty, burst-resistant lay-flat discharge hose designed for pool backwashing, draining and sump pump use, complete with clamps for secure connections.

If you need a durable hose to move large volumes of pool water quickly and safely, this Sepetrel model combines a reinforced braided core with weather- and chemical-resistant materials to stand up to repeated use. Built with a 1.2mm wall thickness and a circular weave polyester braid, it remains flexible when laid flat and resists bursting under typical backwash pressures. The 100-foot length gives you reach for inground and above-ground pool set-ups and emergency drains while included metal clamps make attachment straightforward.

How sturdy is this hose when backwashing or draining a pool?

The Sepetrel hose uses high-tensile braided polyester in a circular weave to deliver strong burst resistance and long life under pressure. Its thicker 1.2mm walls reduce bulging and maintain shape during heavy flow, so it handles typical pool backwash demands reliably.

• 1.5-inch inner diameter for high-volume flow
• 1.2mm wall thickness for extra puncture and burst resistance
• Circular woven polyester braid reinforces tensile strength
• Includes metal clamps for tighter seals and secure hookups

Will it resist pool chemicals and outdoor weathering?

This hose is formulated to tolerate common pool chemicals and outdoor exposure without becoming brittle or losing flexibility. That weatherproofing helps it stay usable across seasons and reduces the need for frequent replacement.

• Chemical-tolerant outer compound protects against chlorine and sanitizers
• UV- and weather-resistant construction preserves flexibility
• Recommended for repeated seasonal and emergency use
• Store coiled and out of direct sunlight for longest life

Is the Sepetrel hose easy to connect and use with my pump or filter?

Yes—its standard 1.5" diameter fits most pool pumps, sand filters, and sump pump outlets. For best results, warm the hose end slightly for easier fitting, position the clamp near the pipe edge, and tighten firmly to ensure a leak-free connection.

• Standard 1.5" size matches common pump and filter outlets
• Two included metal clamps secure the hose to fittings
• Lay-flat design simplifies storage and handling
• 100-foot length reaches distant discharge points or septic areas

How should I maintain and store this hose to extend its life?

Rinse and drain the hose after use, coil it without tight kinks, and store in a cool, shaded area to avoid prolonged UV exposure. Check clamps and connection points periodically for tightness and signs of wear.

• Flush clean water through after chemical or dirty use
• Drain fully, then coil loosely to prevent creases
• Keep out of direct sun and extreme cold when not in use
• Replace clamps if they show corrosion or lose grip

Who is this for: The Sepetrel Pool Backwash Hose suits homeowners, pool service professionals, and property managers who need a reliable, long-reach discharge hose for routine backwashing, draining, or emergency water removal. It is ideal for both inground and above-ground pools, hot tubs, and sump pump applications where chemical resistance, burst protection, and secure fittings are priorities.

• Material highlights: high-tensile polyester braid, durable outer compound
• Size: 1.5" inner diameter, 100' length, 1.2mm wall thickness
• Included accessories: two metal hose clamps for secure attachment
• Primary uses: pool backwash, filter drainage, sump pump discharge