RETOTLA 2-Pack 11x4.00-5 Flat-Free Lawn Mower Tires — Polyurethane Front Wheels, 6" Rim, Rust-Resistant

RETOTLA 2Pcs 11x4.00-5 flat-free lawn mower tires are durable, airless front wheels designed to replace 11x4.00-5 pneumatic tires on zero-turn and push mowers, eliminating flats while protecting turf.

These replacement wheels pair a reinforced zinc-plated steel rim with a high-density polyurethane tire to provide puncture resistance and long service life. Built to match common 6" rim diameters and fit a variety of hubs using included bearings and metallurgical sleeves, the RETOTLA tires are engineered for residential and light commercial mowing where smooth, low-impact ground contact matters.

Will these tires fit my mower and hub setup?

These 11x4.00-5 tires are made to work with a 6" wheel rim and include two steel bearings (3/4" and 5/8") plus a metallurgical sleeve to adapt to bushings between 3.4" and 5". Confirm your rim diameter and hub bore before ordering so the supplied bearings and sleeve match your axle.

• Wheel rim diameter: 6"
• Tread width: 4", overall diameter: 11"
• Included bearings: 3/4" and 5/8" steel bearings
• Adapter sleeve fits bushings from 3.4" to 5"

How durable are these flat-free polyurethane tires?

RETOTLA uses high-density polyurethane formulated to resist punctures, cuts, and abrasion so the tires outlast standard pneumatic models. Because they’re solid and airless, they won’t lose pressure or require patching; the polyurethane construction typically lasts multiple seasons under normal use.

• Airless, puncture-proof polyurethane compound
• Expected life: significantly longer than pneumatic tires under similar conditions
• Rust-resistant zinc-plated steel rim for wet conditions
• Pressure-tested load structure for consistent performance

Will these tires harm my lawn and where should I use them?

The smooth, tread-free surface is designed to minimize turf marking and compaction compared with aggressive knobby treads, making them suitable for lawns, dry grass, and level gravel paths. Avoid using them on wet mud, steep inclines, or very uneven ground—those conditions can increase slippage and accelerate uneven wear.

• Smooth tread reduces turf scuffing
• Ideal surfaces: lawns, dry grass, level gravel
• Not recommended: wet mud, steep slopes, highly uneven terrain
• Remove weight during long storage to prevent flat spotting

How much weight can each tire carry and what maintenance is needed?

Each RETOTLA 11x4.00-5 tire supports up to 350 lbs, so a pair handles typical front-end loads for zero-turn mowers; a complete four-wheel set carries about 700 lbs per axle grouping as specified. These tires require little maintenance—inspect bearings and rim fasteners periodically and avoid prolonged static loading to prevent deformation.

• Load capacity: 350 lbs per tire
• Rim finish: zinc plating for corrosion resistance
• Maintenance: periodic bearing and rim checks
• Storage tip: remove load during long idle periods to prevent flat spots

Who is this for: RETOTLA 11x4.00-5 flat-free tires are aimed at homeowners, landscapers, and small-property managers who want a low-maintenance front wheel replacement for zero-turn and push mowers. Choose these tires if you need puncture-resistant, turf-friendly wheels that reduce downtime from flats while fitting common 6" rims and a variety of hub bores.