Qualipo 20x10.00-8 Tubeless Tire & Wheel Assembly, 2-Pack — 3/4" Bore, 3.5" Hub, 4-Ply Durable Lawn Mower Replacement

These are two 20x10.00-8 tubeless tire-and-wheel assemblies from Qualipo, featuring a 3/4" bore, 3.5" offset hub, reinforced steel rim and a 4-ply rubber tire rated for heavy lawn and garden use.

If you need replacement rear wheels for a riding mower, garden tractor, utility cart or similar equipment, these pre-mounted tires simplify swapping out old or damaged wheels. Each assembly combines a puncture-resistant tubeless tire with a welded steel rim sized to fit an 8" rim diameter, offering broad compatibility with lawn-care and light-utility machines when the hub and bore match your machine’s specs.

How do these wheels fit my mower or garden tractor?

Fit depends on three physical dimensions: rim diameter, hub offset, and bore size. These assemblies mount on an 8" rim diameter, a 3.5" offset hub and a 3/4" bore with a 3/16" keyway — verify those match your existing wheel or axle before ordering.

• Rim diameter: 8"
• Tire size: 20x10.00-8
• Hub offset: 3.5"
• Bore ID: 3/4" with 3/16" keyway

What performance can I expect on grass and rough terrain?

The S-pattern tread and high-rubber construction provide traction while minimizing turf scarring. Designed as a 4-ply tubeless tire, it balances durability and ride comfort for common yard and light-farm tasks, resisting many punctures and wearing evenly under typical loads.

• 4-ply rubber for tear and wear resistance
• S-pattern tread for grip and lawn protection
• Tubeless design reduces the risk of sudden flats
• Supports up to 1190 lbs (540 kg) per wheel under dynamic conditions

How easy is installation and maintenance?

Because the tire comes pre-mounted on the rim, installation is normally straightforward: slide to your axle, secure through the bore/keyway, and check clearances. Tubeless construction and reinforced rim reduce routine maintenance, though periodic pressure checks and visual inspections are still recommended.

• Pre-mounted wheel and tire for quick swap-outs
• No inner tube to install or replace
• Inspect valve stem and rim welds during install
• Check tire pressure and hub fit after first use

Are there use or safety limits I should know about?

These wheels are built for off-highway equipment and light utility use — they are not certified for highway driving or permanent static load applications. Always confirm load distribution and fit for your specific machine and avoid using them where highway safety standards are required.

• Not for highway use or static load bearing
• Maximum rated dynamic load: 1190 lbs (540 kg) per wheel
• Verify axle compatibility and keyway alignment
• Follow manufacturer torque and safety recommendations

Who is this for? These Qualipo 20x10.00-8 tubeless tire-and-wheel pairs are intended for homeowners, landscapers and small-farm operators who need reliable, easy-to-fit replacements for riding mowers, garden tractors, utility carts, pressure washers or similar equipment. They suit anyone seeking a puncture-resistant, pre-mounted wheel that delivers traction and reduced turf damage, provided the rim, bore and hub measurements match their equipment. If you need wheels for commercial heavy-haul highway vehicles, or if your axle dimensions differ, check compatibility or consult a technician before purchase.