QNHEAY 10ft 10AWG Solar Cable Entry Gland with MC4 Extension - IP67 Weatherproof, UV-Resistant

QNHEAY's 10ft 10AWG solar cable entry gland with MC4 extension is a weatherproof, easy-to-install cable routing solution for 100–200W solar panels on RVs, boats, vehicles, and buildings.

This compact assembly combines a robust cable gland with a 10-foot, 10AWG solar extension terminated in MC4-compatible connectors to help you route panel output through roofs or bulkheads while maintaining a water-resistant seal. Built with an IP67-rated connector, a silicone sealing ring, and an ABS housing resistant to UV exposure, the unit is designed for outdoor use. Installation supports either screw or adhesive mounting and includes a perforation-ready connector end for quick panel penetration.

How does this product protect the cable entry from water and weather?

The entry gland and MC4 connector incorporate multiple layers of protection to keep moisture out of the vehicle or structure. The silicone O-ring and IP67-rated connector prevent water ingress at the mating point, while the ABS housing resists ultraviolet degradation.

• Silicone waterproof ring for a secure seal at the connector interface
• IP67-rated connector to withstand dust and temporary immersion
• ABS housing with UV resistance to prevent cracking or fading
• Optional sealant recommended around mounting points for extra protection

What makes installation quick and user-friendly?

One end of the cable assembly is fitted with a ready-made solar connector so you can plug directly into a panel; the opposite end is designed for easy piercing and passing through a pre-cut hole. The kit includes fixing screws and adhesive so you can choose the mounting method that best matches your surface and access.

• Pre-terminated MC4-compatible connector for fast connection to panels
• Perforation-friendly end to thread through roof or bulkhead openings
• Included fixing screws and adhesive for two installation options
• Simple tighten-cover step to clamp the gland and hold the cable in place

Which systems and panel sizes is this cable suitable for?

This 10FT, 10AWG extension is sized to handle typical currents from 100W to 200W solar panels, making it a good match for small off-grid arrays, single-panel vehicle systems, or supplemental panels on boats and sheds. It's intended as a routing and connection component rather than a complete power system.

• Recommended for 100W–200W solar panels
• Works with RVs, trailers, camper roofs, boats, garages and small buildings
• 10AWG conductor suitable for modest current loads with low voltage drop over 10ft
• MC4-compatible ends for standard solar panel interfacing

Are there any installation tips or precautions I should follow?

For a lasting, leak-free installation, use the provided fixing method and then add additional sealant around the gland and screw penetrations. The product includes adhesive and screws, but extra caulk improves long-term weather resistance—especially in marine or high-vibration environments.

• Apply exterior-grade sealant around the gland and screw holes after mounting
• Use the included screws or glue based on substrate material and access
• Ensure the cable is clamped securely to avoid strain on connectors
• Inspect seals periodically, especially after heavy weather or vibration

Who is this for: Installers, DIYers and van/boat owners who need a straightforward, durable way to route a single solar panel feed through a roof, deck or bulkhead will appreciate this gland and extension. It suits anyone fitting 100–200W panels who wants a direct-plug MC4 connection, UV-resistant housing, and flexible mounting options for reliable outdoor service.