Preboun Pool Liner Bead Lock Roll 180 ft White - Flexible PVC T-profile, Includes Mallet

Preboun 180 ft pool liner bead lock is a flexible white PVC bead wedge roll that secures and seals above-ground and inground pool liners with a T-shaped profile and included rubber mallet.

Replace or repair a loose pool liner quickly with this 180-foot set of Preboun bead locks. Supplied as three 60-ft rolls, these white PVC coping strips are made to wedge into your pool receiver track and hold liner bead material firmly in place. The kit is lightweight, weather-resistant and reusable, designed to work with vinyl liners in fiberglass, above-ground and in-ground installations.

How does the Preboun bead lock keep my liner from slipping?

The bead lock uses a T-shaped profile plus triple parallel barbs on each side of the embedded tail to grip the liner bead and resist movement. Once seated into the pool receiver track, the wedge design draws the liner tight against the wall, creating continuous mechanical engagement across the seam.

• T-shaped ridge for stable seating in the receiver track
• Three rows of barbs for enhanced liner gripping strength
• Flexible PVC adapts to curved and straight wall profiles
• White finish blends cleanly with most liner colors

What tools and steps are needed to install these pool liner clips?

Installation is straightforward: press the bead lock into the receiver with your fingers and tap it fully into place with the included rubber mallet. The package contains three 60-foot rolls and a mallet, so you have the basic tool to seat the strips; cutting the roll to length with snips or a utility knife is all that’s required.

• Use fingers to start the bead lock into the track
• Seat fully with the supplied rubber mallet for even pressure
• Trim rolls to fit corners or short run lengths as needed
• Remove and reuse strips when performing liner changes

Will these bead locks work with my pool type and liner material?

Preboun bead locks are compatible with most vinyl pool liners and receiver tracks found in above-ground, in-ground, and some fiberglass pools. Their flexible PVC composition allows for installation on slightly curved walls and standard receiver geometries, but always confirm receiver width and bead dimensions before purchase.

• Designed for vinyl liner beads in above-ground and in-ground pools
• Flexible PVC fits many standard receiver tracks and curves
• Total length 180 ft (three 60-ft rolls) covers common pool perimeters
• White color coordinates with many liner palettes

How durable are these bead locks and how should I store them?

The strips are made from weather-resistant PVC that tolerates exposure to sunlight and pool environments better than brittle plastics, allowing for repeated use over several seasons. When not installed, roll them loosely and store away from direct heat and sharp objects to preserve shape and prevent winding hazards around children.

• PVC construction resists cracking and moisture damage
• Reusable for liner changes when handled carefully
• Store rolled, away from heat and children for safety
• Inspect before reinstallation for any wear or deformation

Who is this for: Preboun 180 ft pool liner bead lock is ideal for pool owners, maintenance technicians and DIYers needing an affordable, easy-to-install liner retention solution. If you maintain an above-ground or inground pool with a vinyl liner and want a straightforward, reusable system to secure the bead, this kit delivers ample length, a mallet for installation, and flexible PVC strips that blend with many pool styles.