Poolvio 1.5" Pool Vacuum Hoses for Inground Cleaners — 8×40" Blue Sections, Crush‑Resistant PE/EVA

These replacement hose sections are designed for suction-side pool cleaners and are built from PE and EVA materials to deliver lightweight durability and reliable water flow. The 1-1/2 inch cuffs fit most automatic cleaners, and the modular eight-piece design makes it simple to tailor the total length to your pool’s shape and cleaner model. Before first use, filling each section with water helps eliminate air pockets and ensures consistent suction.

How do I assemble the Poolvio 1.5" hoses for my cleaner?

Assembling the Poolvio hoses is straightforward: align the male and female cuffs, push sections together until seated, and add or remove segments to reach the right total length. Make sure each connection is fully seated and the hose is filled with water to prevent air from breaking suction.

• Eight 40" sections snap together to form up to 26 feet.
• 1-1/2" cuffs match most suction-side cleaner boots.
• Fill with water prior to attaching to maintain steady vacuum.
• Trim or omit sections to customize length for irregular pools.

Will these hoses fit my automatic suction cleaner?

The 1-1/2 inch cuffs are made to fit the majority of suction-side pool cleaners and standard skimmer or vacuum plate connections. If your cleaner requires a different cuff size or a proprietary connector, you may need an adapter; otherwise these hoses will connect directly for typical setups.

• Universal 1-1/2" diameter to match common cleaner fittings.
• Flexible material accommodates slight misalignment.
• Simple adapters can bridge nonstandard connections when needed.
• Check your cleaner’s manual for recommended hose size if unsure.

How durable and easy to maintain are Poolvio hose sections?

Manufactured from PE and EVA, these hoses resist crushing, kinking, and UV wear while remaining lightweight for easy handling. Rinse and dry sections after the season to prolong life, and store them coiled away from direct sunlight to prevent premature aging.

• PE/EVA blend for strength and flexibility.
• Crush-resistant walls maintain internal flow path.
• Simple rinsing removes debris; dry before long-term storage.
• Replace individual sections if any segment becomes damaged.

What length should I use and why fill the hose with water first?

Select a total hose length that allows the cleaner to reach corners without leaving excessive slack that tangles or pools air. Filling each section with water eliminates trapped air that can reduce suction and cause the cleaner to lose traction or repeatedly surface.

• Measure from skimmer/vacuum plate to farthest pool corner for ideal length.
• A full 26 ft setup suits large inground pools; remove segments for smaller layouts.
• Water-filled hoses maintain continuous vacuum and stable cleaner performance.
• Start with a conservative length and add sections if the cleaner can’t reach areas.

Who is this for? Poolvio 1.5" Pool Vacuum Hoses are made for homeowners and pool service professionals who need a dependable, easy-to-customize replacement for suction-side automatic cleaners. If you want a durable, modular hose set that suits most inground cleaner models and simplifies seasonal maintenance, these sections offer a practical, cost-effective option with responsive customer support if questions arise.