Pooloob Cordless Pool Vacuum Robot PF1 — Floor-Only Cleaner, 150min Runtime & Triple Filtration

The Pooloob PF1 is a cordless robotic vacuum designed to clean flat-bottom above- and in-ground pool floors with powerful suction, three-stage filtration, and up to 150 minutes of runtime.

Built for regular maintenance rather than heavy restorations, the PF1 tackles routine debris—leaves, sand, and fine dust—without hoses or complex hookups. Lightweight and sealed to IPX8 standards, this unit combines a wide intake and stepped filtration to reduce manual scooping, then floats to the wall for easy retrieval when its run ends.

How does the PF1 remove big and fine debris from the pool floor?

Cleaning relies on a large 7.2-inch intake that pulls in bulky leaves and a motor capable of moving 1,440 gallons per hour. Inside, a three-stage filtration sequence separates large chunks from smaller particles so the water looks clearer after each cycle.

• 7.2-inch suction port catches large debris quickly
• Powerful 1,440 GPH motor maintains steady flow
• Three-layer filter traps mixed particle sizes, reducing rescues and clogs
• Removable filter elements make disposal cleaner and simpler

Can the PF1 run without cords, and how long will a single charge last?

The PF1 is fully cordless and runs up to 150 minutes after a roughly 3.5-hour charge, allowing it to cover pools up to 1,345 sq. ft. The lack of a tethered power cable means fewer entanglements and easier placement anywhere around the pool.

• 3.5-hour recharge time for the internal battery
• Up to 150 minutes continuous operation per charge
• Sufficient coverage for most residential pools up to 1,345 sq. ft.
• No power cord reduces installation complexity and setup time

What features reduce mess and simplify handling after cleaning?

The PF1 is designed for tidy removal and minimal handling. It automatically parks against a wall at the end of a cycle and includes a floating buoy with an 8-foot tether for easy lift-out, while a debris-locking design keeps captured material inside the unit when you pull it from the water.

• Auto-park behavior positions unit for safe retrieval
• Floating buoy and tether included for convenient lifting
• Debris-lock prevents spills when removing the cleaner
• Top-mounted controls and charging port avoid flipping the device

How durable is the PF1 and what pool surfaces can it handle?

Engineered with a fully sealed motor and IPX8 waterproofing, the PF1 is intended for long-term underwater use. It’s optimized for flat-bottom pools—both above-ground and in-ground—and can climb gentle slopes and negotiate small obstacles, but it’s not suitable for irregular-bottom pools or initial deep cleanups of heavily fouled pools.

• IPX8-rated waterproofing for reliable submersion
• Climbs slopes up to 18° and crosses drains up to 8mm high
• Works best on flat-bottom pools—avoid wedge, hopper, or sport bottoms
• Not intended for initial algae- or sludge-heavy restorations

Who this is for: The Pooloob PF1 suits pool owners seeking a low-effort, cordless solution to day-to-day floor cleaning on flat-bottom residential pools. If you want to reduce manual skimming and frequent vacuuming for leaves, sand, and fine debris—and your pool isn’t heavily contaminated or irregularly profiled—the PF1 offers a practical balance of runtime, filtration, and hands-off convenience. Each kit includes the robotic cleaner, power adapter, floating buoy with an eight-foot tether, cleaning brush, spare wheel rubber rings, screws, and user manual, plus a 2-year warranty and lifetime technical support for added confidence.