PoolGuard in-ground pool alarm PGRM-2 — White, NSF-certified, 85 dB horn & 200 ft remote

The PoolGuard PGRM-2 is a tamper-resistant in-ground pool alarm that continuously monitors water disturbances and alerts you with a loud horn plus an in-house remote receiver.

The PoolGuard PGRM-2 is a battery-powered pool safety alarm designed for in-ground pools up to 800 square feet. Engineered and assembled in the USA, it meets NSF certification to ASTM F2208 and uses updated sensing technology to reduce false alarms from wind, rain, or small floating debris. The unit stays armed while installed, sounds if removed, and has a convenient sleep mode when you want to use the pool.

How does the PGRM-2 detect a potential pool intrusion?

The PGRM-2 senses disturbances on the water surface typical of a small child or sudden entry. When installed, it performs an automatic wake-up and system test to confirm functionality, then remains alarm-ready. Its detection algorithm is tuned to distinguish significant disturbances from minor environmental noise.

• Designed to detect intrusions similar in disturbance to a one-year-old child.
• New sensing technology minimizes false triggers from wind, rain, or small debris.
• Automatic self-test on installation ensures the unit is operational.

What happens when the alarm is triggered or tampered with?

If the PGRM-2 senses a disturbance it activates an 85-decibel horn (measured at 10 feet) to alert anyone nearby. The alarm is tamper-proof—removing it from the pool also triggers the alarm. The included in-house receiver provides remote notification up to 200 feet away and indicates low battery status.

• 85 dB horn at 10 feet for immediate local alerting.
• In-house remote receiver with approximately 200-foot range and low-battery indicator.
• Tamper detection sounds alarm if the unit is removed from the pool.

How do you operate and maintain the PoolGuard PGRM-2?

Operation is straightforward: install the alarm into the pool to arm it; remove it to place it into sleep mode while swimming. The poolside receiver runs on a 9-volt battery (not included) with about a one-year battery life, and the indoor receiver is powered by the supplied 12V adapter. Routine checks and battery replacement ensure continued protection.

• Arm by placing in the pool; sleep mode by removing the unit for pool use.
• Poolside alarm uses a 9V battery (not included), ~1 year battery life.
• Indoor receiver uses the included 12V power supply and reports low battery audibly.

Where can I install this alarm and are there placement precautions?

The PGRM-2 is made for in-ground pools up to 20 x 40 feet (800 sq ft). Install it away from strong return jets or nearby plumbing that could create continuous flow or false readings. Follow placement guidance to ensure optimal sensing and to allow the unit’s automatic wake-up and self-test to complete properly.

• Suitable for in-ground pools up to 800 square feet (20 x 40 feet).
• Do not place the alarm too close to return lines or powerful jets.
• Perform visual checks and battery maintenance at recommended intervals.

Who is this for: PoolGuard PGRM-2 is for homeowners, pool managers, and caretakers who want an NSF/ASTM-certified, always-armed in-ground pool alarm that prioritizes audible warning, tamper detection, and simple daily operation. It’s ideal for residential pools where an independent, battery-powered safety alert with remote notification is desired. For customers seeking integration with gate alarms or complex home security panels, evaluate compatibility since the PGRM-2 is sold as a standalone in-house receiver system.