PoolEye Pool Alarm PE23 — Immersion Mountable for Inground & Aboveground Pools, ASTM-Certified, Dual Sirens

PoolEye Immersion Mountable Pool Alarm is a permanently mounted, ASTM-certified underwater motion alarm that detects small disturbances and sounds both a poolside siren and an in-home alert for added safety.

Adding a pool alarm to a comprehensive safety plan helps provide an early alert if someone or something enters your pool unexpectedly. The PoolEye PE23 is engineered to meet ASTM F2208 standards and is built for most inground pools and aboveground pools with a top rail. It uses a submerged motion sensor to reduce nuisance alerts caused by surface ripples, and it includes both a loud poolside siren and a remote in-home receiver so you’re notified whether you’re outside or inside the house.

How does PoolEye detect an intrusion without constant false alarms?

The alarm uses an immersion, sub-surface motion sensor that listens for wave patterns below the water surface rather than reacting to every surface ripple. This approach filters out many common causes of false alerts like wind or small surface splashes. Sensitivity is tuned so that objects as light as 15 lb (about 7 kg) can trigger the system.

• Underwater motion detection reduces false alarms from wind and debris.
• Certified to ASTM F2208 for reliable performance on standard-size pools.
• Sensitivity set to detect disturbances at or above ~15 lb (7 kg).

What installation steps are required for inground and aboveground pools?

PoolEye is designed for stationary mounting and includes hardware for both concrete deck (inground) and top-rail (aboveground) installations. Inground installations require drilling into a concrete deck to secure the unit; follow the included manual for spacing recommendations on larger or nonstandard pools. Aboveground installations use the provided top-rail mounting bracket for a stable fit.

• Inground: must be drilled into concrete deck using the supplied fasteners.
• Aboveground: mounts to the top rail with the included bracket and hardware.
• Manual provides guidance for pools exceeding typical dimensions or unusual layouts.

What alerts and controls come with the PoolEye alarm system?

The system offers dual notification: an 85 dB siren mounted poolside and a wireless in-home receiver so you’ll get an audible alert inside the house. A magnetic key is supplied to arm, disarm, and reset the alarm quickly after an authorized entry. The unit runs on batteries, and the design requires removing a few screws to access the battery compartment for replacement.

• Poolside siren emits 85 dB for immediate outdoor notification.
• In-home receiver provides indoor alerts so you won’t miss a trigger.
• Magnetic key included for quick reset and authorized access control.
• Battery-operated; follow manual for safe battery access and replacement.

How should I maintain and care for the PoolEye alarm?

Routine inspection and seasonal care extend the life and reliability of the alarm. Remove the unit if water temperature will fall below freezing to prevent damage; clean mounting areas and check hardware periodically to ensure a solid, stationary installation. Replace batteries according to the manual and test the system after any maintenance.

• Remove unit if water temperature drops below 32°F to avoid freeze damage.
• Inspect mounting hardware and re-tighten as needed for stability.
• Change batteries following the manufacturer’s guidelines and test regularly.

Who is this for: PoolEye PE23 is ideal for homeowners and guardians who want an ASTM-certified, permanently mounted pool alarm to add a layer of protection for family pools. It works well for standard-sized inground pools and aboveground pools with a top rail, and for anyone who wants both poolside and indoor notification without relying solely on visual supervision. For larger or unusually configured pools, consult the included installation manual to confirm it meets your site’s requirements.