Podoy 1-1/2" Pool Filter Hose Kit — 6 ft + 3 ft Replacement Hoses with Metal Clamps and PTFE Tape

Podoy's 1-1/2" swimming pool filter hose kit supplies two flexible replacement hoses (3 ft and 6 ft), metal clamps, and PTFE tape to reconnect above-ground vacuums, pumps, skimmers, and filters quickly.

If your above-ground pool hose is cracked, leaking, or the wrong length, this Podoy kit offers a straightforward swap to restore proper flow. The set includes one 6-foot hose and one 3-foot hose sized for 1-1/2" fittings, plus two metal hose clamps and PTFE thread tape to improve threaded seals where required. Adapters are not included, so confirm your equipment uses 1-1/2" ports before ordering.

Will these hoses fit my above-ground pump, vacuum, or skimmer?

These hoses are manufactured for connections with a 1-1/2-inch inner diameter. They work with many common above-ground pool accessories such as vacuums, skimmers, and sand-filter returns, provided those devices accept a 1-1/2" hose. Measure your existing hose or port to ensure compatibility prior to purchase.

• Includes one 6 ft (72 in / 182.8 cm) and one 3 ft (36 in / 91.4 cm) hose for flexible routing.
• Intended for 1-1/2" hose ports—verify before ordering.
• Compatible with many pumps, pool vacuums, skimmers, and return lines.

How durable and easy to install are these replacement hoses?

Made from polyethylene, the hoses are lightweight, flexible, and resistant to everyday wear from handling and water exposure. Installation is a basic DIY task: slide the hose onto the port, tighten the included metal clamp, and use PTFE tape on threaded fittings where needed for a better seal.

• Durable PE construction resists cracking and kinking in typical pool conditions.
• Two metal hose clamps included for secure, tool-assisted fastening.
• PTFE tape rolls (two) supplied to help seal threaded connections.

Which hose length should I use for different pool layouts?

The kit supplies two lengths so you can choose the best fit without stretching or looping hoses awkwardly. Use the 6 ft hose when the pump or filter is farther from the pool, and the 3 ft hose for close-mounted equipment to reduce excess hose and potential flow resistance.

• 6 ft hose for longer runs between pool and pump or remote filters.
• 3 ft hose for compact setups or short connections to vacuums and skimmers.
• Mix and match lengths for multi-component systems or to replace different damaged sections.

What else should I know before buying?

This package does not include adapters, so if your equipment uses a different diameter or a threaded fitting type, you'll need the appropriate adapter. The hoses are intended for standard above-ground pool use—avoid heat sources, sharp edges, and solvent-based adhesives that can weaken the material.

• Adapters not included—confirm port type first.
• Avoid sharp bends and contact with abrasive surfaces to extend hose life.
• Not intended for pressurized plumbing beyond typical pool pump pressures.

Who is this for? Pool owners and maintenance pros who need a quick, cost-effective replacement for worn or mismatched 1-1/2" hoses will find this Podoy kit useful. It’s ideal for those with above-ground vacuums, skimmers, or pumps needing a short or medium-length hose swap without ordering custom lengths. If you know your port size is 1-1/2" and want a ready-to-install pair of hoses with clamps and sealing tape, this kit covers the essentials for straightforward repair and setup.