phepetroll 16" Pneumatic Wheelbarrow Wheels 4.80/4.00-8 Tubed Tires, 2-Pack with 5/8" & 3/4" Adapter Kit, 3–7" Hub Fit

These phepetroll 16" pneumatic wheelbarrow tires and wheels (fits 4.80/4.00-8) come as a 2-piece replacement set with adapters to fit 5/8" or 3/4" bearings and hub lengths from 3"–7".

If your wheelbarrow, hand truck, cart or garden trailer needs smoother rolling and better shock absorption, this pair of pneumatic 16-inch wheels is built for that purpose. Each tire is tubed, rated up to 30 psi, and designed with a deep, multi-directional tread for traction on grass, gravel, sand, dirt and pavement. An included adapter kit supplies bearings and spacers so you can match the hub and axle sizes commonly found on consumer equipment.

How do these wheels improve pushing and maneuvering?

Compared with solid or small caster wheels, pneumatic tires compress to absorb bumps and reduce vibration, which translates into easier steering and less effort during transport. The larger 16" diameter helps roll over obstacles while the tread minimizes skidding on wet or uneven surfaces.

• 16" diameter and 3.8" width for smoother rolling and better obstacle clearance
• Pneumatic construction that reduces jolts and hand fatigue
• Special tread pattern improves grip and channels away mud and water
• Rated to support approximately 400 lb per wheel under normal conditions

Which hub and bearing configurations are supported?

The set includes an adapter kit so you can use either 5/8" or 3/4" bearings and adjust the centered hub length between roughly 3" and 7". That flexibility makes these wheels compatible with many popular wheelbarrow, dolly and trailer axles.

• Comes with four 5/8" bearings for standard axles
• Includes four 3/4" nylon spacers in 1/2" and 1.5" lengths to tune hub fit
• Centered hub length adjustable via spacers to fit common mounting depths
• Confirm axle diameter and hub depth before installation for best fit

What are the durability and performance features to expect?

These tires are molded from durable rubber with a reinforced tread designed to resist cracks and cuts. The geometry of the lugs increases contact area for load distribution and drainage, helping the tire perform reliably across seasons and terrain types.

• High-durability rubber compound resists impact and abrasion
• Tread designed for traction, drainage and reduced slippage
• Max inflation 30 psi (tubed pneumatic) for optimum balance of cushioning and load capacity
• All-weather resistance suitable for outdoor use and storage

How easy is installation and ongoing maintenance?

Installation is straightforward for most DIYers: remove the old wheel, choose the correct bearing and spacer combination, then secure the wheel to the axle. Routine checks of tire pressure and occasional inspection of bearings and spacers keep the wheels rolling smoothly for seasons to come.

• Swap directly into wheelbarrows, hand trucks, dollies, trailers and more
• Check and inflate to appropriate pressure (do not exceed 30 psi)
• Inspect bearings and spacers after initial few uses and periodically thereafter
• Replace tubes or bearings as needed to maintain performance

Who is this for: Gardeners, landscapers, contractors and homeowners who need a dependable, shock-absorbing replacement wheel for wheelbarrows, yard trailers, hand trucks, snow blowers or other utility equipment will find this phepetroll 16" pneumatic wheel set useful. It’s suited to anyone wanting improved ride comfort, traction over mixed terrain and the flexibility to adapt to common axle sizes.