Pentair Trap Lid for Purex/WhisperFlo Pumps — Clear Replacement for Pumps After 11/98

A clear, genuine Pentair trap lid engineered to replace the original cover on Purex/WhisperFlo and compatible Pentair inground pump models built after November 1998.

This replacement trap lid is made to fit Pentair Sta-Rite IntelliPro VS-SVRS series pumps as well as many Pentair WhisperFlo and IntelliPro VF/VS 3050 and VS-SVRS inground pumps. Manufactured to Pentair specifications, the clear cover restores visibility into the pump strainer basket, helps ensure a proper seal, and lets you confirm water flow and debris capture without removing the lid. The lid dimensions measure 6-3/4 inches long by 6-3/4 inches wide and 1-1/2 inches high, and it ships in a transparent finish that matches factory parts.

Which pump models will this Pentair trap lid work with?

This lid is compatible with a range of Pentair inground pumps produced after November 1998. It fits Sta-Rite IntelliPro VS-SVRS units and many WhisperFlo and IntelliPro VF/VS 3050 and VS-SVRS pumps. Confirm your pump model and serial information before ordering to ensure exact compatibility.

• Designed for Pentair Sta-Rite IntelliPro VS-SVRS pumps
• Compatible with Pentair WhisperFlo series
• Fits IntelliPro VF and VS 3050 pump models
• Intended for pumps manufactured after 11/98

How does this clear lid help with maintenance and inspection?

The transparent construction lets you visually check the strainer basket and incoming water without removing the lid, which saves time during routine upkeep. You can spot debris buildup, air leaks, or low flow quickly and decide whether the basket needs cleaning. Because it’s an OEM Pentair part, it mates correctly with the existing pump housing for reliable sealing.

• Quick visual checks for debris and water flow
• Reduces unnecessary lid removal during inspections
• OEM fit reduces risk of leaks compared to non-genuine covers

What are the physical dimensions and material details?

The cover measures 6-3/4 inches in length, 6-3/4 inches in width and 1-1/2 inches in height, matching the footprint of factory trap lids for compatible pumps. Constructed from durable, clear thermoplastic, it resists pool chemicals and offers good impact resistance for normal service life. The transparent finish is chosen to match original equipment aesthetics and function.

• Dimensions: 6-3/4" L x 6-3/4" W x 1-1/2" H
• Clear thermoplastic construction for chemical resistance
• Designed to fit factory threads and sealing surfaces

How do I install the replacement trap lid safely and correctly?

Install the lid with the pump powered off and water drained from the housing according to your pump manual. Align the mating surfaces, engage the threads or clamp, and tighten evenly until seated to maintain a watertight seal. Replace or inspect the O-ring or gasket at the same time to ensure continued leak-free operation.

• Power off pump and relieve system pressure before handling
• Check and replace O-ring or gasket as needed
• Tighten evenly to secure a proper seal without over-torquing

Who is this for: Pool and spa owners, service technicians, and maintenance professionals needing a genuine Pentair replacement trap lid for compatible inground pumps built after November 1998. If you want a direct-fit, clear lid to restore visibility into the pump strainer and maintain factory performance, this Pentair cover is intended for your WhisperFlo, IntelliPro, or compatible pump housing.