Pawfly 200 ft 1/4-inch Drip Irrigation Tubing — Black, 0.5 GPH Emitters Every 6in, Includes 24 Fittings

Pawfly 200 ft 1/4" pre‑punched drip irrigation tubing delivers steady, low‑flow watering with built‑in 0.5 GPH emitters spaced every 6 inches, plus 24 fittings to install a complete small‑scale irrigation layout.

This Pawfly kit provides a ready‑to‑use distribution line and the essential connectors to build or repair drip irrigation for vegetable beds, raised planters, containers, and landscape borders. The roll contains 200 feet of flexible polyethylene tubing with factory‑punched emitters, so you avoid manually drilling holes or installing individual drippers. Included adapters, tees, couplings, and end plugs let you route water from a faucet or main line and split it into multiple branches.

How does the pre‑punched tubing make setup faster?

Because emitters are molded into the tubing at 6‑inch intervals, there’s no need to punch holes or attach separate drippers. That saves time when laying long runs and ensures even emitter spacing every time.

• Factory‑installed 0.5 GPH emitters every 6 inches for consistent flow
• Cut to length where needed without losing emitter spacing along the run
• Eliminates extra emitter parts and labor for quicker installation

What fittings are included and how do I use them?

The kit includes 24 pieces to connect the tubing to a water source, tee off into branches, and finish each run. Push‑fit or barbed connections assemble quickly; warming tubing ends makes barbed fittings easier to seat and seal.

• Two 3/4" faucet adapters to attach to a standard spigot or timer
• Two 6‑way reducing tees for creating multiple branch lines
• Ten couplings to join cut lengths and ten end plugs to cap runs securely

How does the tubing perform outdoors across seasons?

Constructed from weather‑resistant polyethylene, the tubing tolerates sunlight and temperature swings common in gardens and patios. Flexibility helps when routing along contours, and the material resists cracking under normal seasonal exposure.

• UV‑resistant PE material for longer outdoor life
• Flexible for installation around corners, raised beds, and containers
• Designed for repeat seasonal use with routine winterizing

How should I plan line length and pressure for best results?

Emitter output is specified at 0.5 GPH under recommended pressure; to keep even delivery, limit each branch to about 33 feet or less. Balance branch lengths and use the provided tees to divide flow, keeping each run within the optimal distance for consistent output.

• Keep individual branches under ~33 feet for best pressure and uniform output
• Use tees to split the layout and couplings to repair or extend lines
• Install a pressure regulator if your source pressure exceeds recommended levels

Who this is for: gardeners, hobby growers, and landscapers looking for a simple, cost‑efficient way to convert beds, containers, or borders into a low‑flow irrigation system. If you want to avoid drilling emitters yourself and prefer a fast setup with a small set of fittings, this Pawfly roll and connector kit gives the components and tubing to create reliable, water‑wise watering for compact to medium planting areas.