Oregon 18" Chainsaw Chain 3/8" LP .050" Gauge, 62 Drive Links — Low-Kickback, LubriTec-Compatible

Oregon's 18" saw chain with a 3/8" low-profile pitch, .050" (1.3 mm) gauge and 62 drive links is a replacement chain engineered for reliable cutting and reduced kickback on compatible consumer chainsaws.

If you need a dependable replacement chain for your 18" guide bar, this Oregon model fits many popular homeowner and light-pro saws. It combines a low-profile 3/8" pitch with a .050" gauge and 62 drive links, and it includes Oregon's LubriTec oiling compatibility and a low-kickback design validated to applicable ANSI and CSA standards. Before ordering, confirm bar length, drive link count, pitch and gauge by checking the chainstamped number or your owner's manual to guarantee a correct match.

How do I confirm this chain fits my saw?

Matching a replacement chain requires four measurements: pitch, gauge, drive link count and bar length. Use the number stamped on your old drive link or follow your chainsaw manual for these specs.

• Pitch: 3/8" low-profile (measure between three rivets, divide by two)
• Gauge: .050" (1.3 mm) — thickness of the drive link that sits in the bar groove
• Drive links: 62 — count the links that engage the saw sprocket
• Bar length: 18" — measure from bar tip to where it meets the saw body

What safety and performance features does this Oregon chain provide?

This chain is built with a bumper drive link and depth gauge geometry to lower kickback tendency while keeping cutting efficiency for homeowner tasks. It was tested to meet the kickback performance requirements cited by ANSI B175.1 and CSA Z62.3 when evaluated per standards.

• Low-kickback design: bumper drive link plus depth gauges for reduced reaction
• LubriTec-compatible: engineered for improved oil distribution to bar and chain
• ANSI/CSA-tested: met the referenced kickback performance requirement
• Original Oregon engineering: designed for consistent tooth geometry and durability

Which saw makes and models is this chain compatible with?

Oregon supplies an extensive cross-reference list — this 18" 3/8" LP .050" chain fits many Echo, Husqvarna, Craftsman/Sears, Homelite, Poulan, Remington and other homeowner saws. Always double-check the specific variant in your owner's manual or the chain stamp.

• Echo: CS-352, CS-346, CS-370, CS-400 and similar 18" models
• Husqvarna: several 136/137/240/235E series when equipped with a 3/8" LP sprocket
• Craftsman/Sears, McCulloch, Poulan, Remington and Kobalt homeowner models listed in the cross-reference
• If uncertain, match the drive link number and the stamped part code from your old chain

How should I install and maintain this replacement chain for longest life?

Proper installation and ongoing care keep cutting consistent and extend component life. Tension correctly, keep the chain sharp, and use appropriate bar oil and LubriTec-compatible lubrication practices.

• Tension: snug without binding; recheck after a few cuts and when warm
• Sharpening: file or grinder to the factory tooth angle when performance drops
• Lubrication: use quality bar oil and take advantage of LubriTec oiling for even distribution
• Inspection: check drive links, rivets and teeth for wear or damage before use

Who is this for: DIY homeowners, property caretakers and light-duty professionals who run 18" bars and require a low-profile 3/8" pitch, .050" gauge chain with 62 drive links. It's suited for routine limbing, pruning and general firewood or storm-cleanup tasks on compatible saw models — provided you verify fit by drive link count, gauge, pitch and bar length before purchase.