Mysora 24VAC Irrigation Valve Solenoid Replacement — 2-Pack Compatible with Irritrol 2400/2500/2600/700, Corrosion-Resistant

The Mysora 2 Pack 24VAC irrigation valve solenoid is a direct-fit replacement for many Irritrol 2400/2500/2600/700 series valves, delivering stable 24VAC actuation and a complete plunger seat assembly for reliable sprinkler control.

If a stuck or leaking irrigation valve is slowing your sprinkler system, these Mysora solenoids restore dependable electrically actuated opening and closing. Each unit includes the coil and plunger seat assembly engineered for standard 24VAC controller operation. They mount with a 3/4" male pipe thread for a straightforward swap, and the corrosion-resistant construction is intended for outdoor valve boxes and frequent cycling.

Will these solenoids work with my Irritrol valves?

Yes — the Mysora solenoid kit is designed to be compatible with Irritrol 2400, 2500, 2600, and 700 series valves when used with a 24VAC controller. It is intended as a like-for-like replacement of the coil and plunger seat assembly for those models.

• Compatible with Irritrol 2400/2500/2600/700 series valves.
• Requires a 24VAC irrigation controller; not for 9V DC battery controllers.
• Not suitable for non-Irritrol branded valves that use different seat or thread designs.
• Remove original coil and seat before installing this replacement assembly.

How easy is installation and what tools will I need?

Installation is a straightforward field repair for most homeowners and landscapers: unthread the old solenoid, remove the old plunger seat, seat the new assembly, and connect the 24VAC wires. The 3/4" male pipe thread (MPT) matches standard valve ports so no modification is usually required.

• Basic plumber's tools: adjustable wrench and flat-head screwdriver.
• Turn off irrigation power and relieve water pressure before starting.
• Hand-tighten coil then finish snug with wrench — avoid over-torquing the plastic body.
• Confirm proper wire polarity is not required for AC; just secure the two lead connections.

What performance and durability can I expect outdoors?

Mysora builds these solenoids with corrosion-resistant materials and a sealed coil to tolerate moisture and routine cycling in valve boxes. While not indestructible, their construction is aimed at typical residential and commercial irrigation conditions.

• Sealed coil housing to resist moisture infiltration.
• Corrosion-resistant plunger and seat materials for longer life.
• Designed for frequent on/off cycles common in irrigation schedules.
• If used with proper wiring and mounting, expect consistent valve actuation.

What should I check if a replacement solenoid doesn't fix my valve?

If the valve still fails after replacing the coil and seat, inspect the diaphragm, bonnet, and valve body for damage or debris. Electrical issues from the controller, wiring faults, or insufficient voltage at the valve can also prevent proper operation.

• Verify 24VAC output from the controller at the valve wiring terminals.
• Check valve diaphragm and internal components for wear or obstruction.
• Ensure wiring connectors are secure and low-resistance.
• Confirm the replacement seat was installed correctly and not cross-threaded.

Who is this for? The Mysora 2 Pack 24VAC solenoid kit is ideal for homeowners, landscapers, and maintenance professionals who need a reliable, cost-effective replacement for Irritrol 2400/2500/2600/700 series valves. It’s best for systems using a 24VAC controller that require a simple field-repair without valve replacement. If you manage multiple zones or prefer keeping a spare on hand, the two-pack offers immediate redundancy for quicker troubleshooting and reduced downtime.