MTB Supply 30 Inch Auger Earth Anchors 6-Pack — 3in Helix, 12mm Rod, Powder-Coated Red

Heavy-duty MTB Supply auger earth anchors—six 30-inch anchors with 3-inch helix and 12mm rod provide secure, screw-in hold for tents, canopies, fences, trees and more.

These ground anchors are engineered to bite into soil quickly and deliver reliable holding power where conventional stakes or posts can fail. Powder-coated in red for corrosion resistance and visibility, each anchor comes with a welded eye ring for fast tie-off and a robust helix welded to a 12mm shaft to handle lateral and uplift loads. The pack of six gives you enough anchors for multiple tie-down points on small buildings, temporary shelters, play equipment and landscaping projects.

How do these anchors install and what tools are needed?

Installation is straightforward: the auger can be turned by hand or with a driver for faster results. The welded eye provides a convenient attachment point for ropes, straps, or carabiners once the anchor is fully seated.

• Screw in by hand using leverage from the eye ring for firm hold.
• Use a power driver or auger tool for compacted or heavy soils.
• No concrete or postholes required—install and remove as needed.

What surfaces and projects are these anchors best suited for?

These auger anchors work well in many soil types, especially loose to medium soils where the helix can bite and resist pullout. They are ideal for temporary and semi-permanent anchoring needs around yards, campsites and work sites.

• Tents, canopies, gazebos and party shelters.
• Fencing, trellises, arbors and small outbuildings.
• Playground equipment, dog tie-outs, and tree guying.

How much load can a single anchor withstand and how do I plan anchors?

Load capacity depends on soil composition, depth, and installation quality; deeper, fully seated anchors in firm soil will resist greater uplift and lateral forces. For safety, use multiple anchors spaced appropriately and attached to independent tie points to distribute forces across the structure.

• Deeper seating and compacted surrounding soil increase holding strength.
• Use at least three anchors per canopy corner or multiple anchors per long side for wind resistance.
• Combine with straps or ratchets to adjust tension and reduce dynamic loads.

What maintenance and storage should I expect for long life?

With minimal care these powder-coated anchors provide years of service—rinse off mud after use and inspect welds and coating for damage. Store anchors dry and off the ground to avoid prolonged moisture exposure when not in use.

• Rinse and dry after use to remove corrosive salts or chemicals.
• Touch up paint if coating is scratched to limit rusting.
• Check eye ring welds periodically for deformation or wear.

Who this is for: MTB Supply’s 6-pack of 30-inch auger ground anchors suits homeowners, event planners, landscapers, campers and light-construction users who need reliable, removable anchoring without digging concrete footings. If you install temporary shelters, secure outdoor equipment, or need flexible tie-down points for seasonal projects, these anchors provide an economical, transportable solution that balances ease of use with heavy-duty hardware.