Moen Woodford Model 17 Repair Kit RK-17MH — 10‑Piece Frostfree Faucet Rebuild Kit with V8 Float & Metal Handle

The Moen Eagle Mountain RK-17MH is a 10-piece repair kit that restores seals, packing, and handle components on Woodford Model 17 frostfree faucets so they operate reliably.

This repair kit supplies every standard part needed to refit a Woodford Series 17 frostfree faucet after years of outdoor use. Instead of replacing the whole valve assembly, the RK-17MH bundle targets the common wear points — packing, washers, handle hardware and the float/check components — bringing the faucet back to proper function and extending service life.

What parts come with the RK-17MH and what do they do?

The kit includes ten components selected to address leaks, stiffness, and handle play. Each element replaces a wear-prone item inside the Model 17 faucet to re-establish a tight seal and consistent operation.

• V8 float kit — restores vacuum/check operation to prevent backflow
• Metal handle and handle screw — replaces corroded or stripped operator parts
• Packing nut, packing, and packing washer — rebuild the stem seal to stop leaks
• Check assembly and other small seals — refreshes internal valves and seating areas

How do I verify the vacuum breaker before installation?

Before installing parts, run the faucet to confirm the vacuum breaker or float/check assembly is functioning and not actively leaking. If the existing vacuum breaker shows external leakage or fails to trap water, note that as you proceed so the replacement float/check components can be seated correctly.

• Operate the faucet under normal pressure and inspect for weeping at the vacuum-breaker area
• Look for irregular movement or binding in the float mechanism
• Replace the float/check parts from the kit if you observe leaks or poor operation

How difficult is installation and what tools will I need?

Replacing the Model 17 internals is a straightforward DIY task for those familiar with basic plumbing repairs. Typical installation requires common hand tools and careful work to avoid damaging the stem or body threads.

• Tools: adjustable wrench, screwdrivers, pliers, plumber's grease, and clean rags
• Time: expect 30–60 minutes for routine rebuilds, longer if parts are corroded
• Tip: clean the bore and inspect mating surfaces before fitting new seals

Which symptoms mean I should use the RK-17MH kit instead of replacing the faucet?

Choose this repair kit when leaks, handle slop, or vacuum-check issues stem from worn internal parts rather than a cracked body or severely damaged stem. Rebuilding with the RK-17MH preserves the existing frostfree valve while restoring reliable performance.

• Persistent drip or weep around the packing nut or spout
• Loose or stripped handle that won't fully engage the stem
• Backflow prevention or float check not seating properly

Who is this for: The Moen Eagle Mountain RK-17MH Woodford Model 17 repair kit is aimed at homeowners, maintenance professionals, and property managers with Woodford Series 17 frostfree faucets who want a targeted replacement of wear items. It’s ideal when the valve body is sound but the internal seals, packing, handle hardware, or float/check parts are worn — offering a cost-effective alternative to full faucet replacement.