MIXC 1/4" Drip Irrigation Tubing 400 ft — 0.27" OD x 0.15" ID, UV-Resistant Flexible Hose

MIXC 1/4" irrigation tubing is a flexible, weatherproof drip hose designed to run 400 feet of micro-irrigation lines that connect emitters, misters and barbed fittings for precise watering.

This 1/4-inch distribution tubing from MIXC provides a reliable, easy-to-install way to extend your drip irrigation network. Made from linear low-density polyethylene, the hose balances strength and flexibility so it can be routed through beds, containers, and around shrubs. It fits most 1/4" barbed fittings and micro-emitters, handles up to 60 PSI intermittently, and is intended for buried or above-ground use when not under constant pressure.

How does MIXC 1/4" tubing simplify setting up a micro-irrigation system?

The tubing serves as a lightweight, flexible branch line to carry water from a main supply to point-of-use emitters. Its pliability lets you make tight turns without many connectors, speeding installation and reducing leak points.

• Compatible with common 1/4" barbed fittings, emitters, misters and micro-bubblers
• Industry-leading flexibility for tighter routing and fewer elbows
• Use as the main line in smaller systems or as branch tubing from 1/2" mains

Is this tubing durable enough for outdoor and seasonal use?

MIXC tubing is manufactured from linear low-density polyethylene which resists cracking and UV degradation when exposed to typical garden conditions. It’s formulated to stay usable year-round either above ground or buried, although it isn’t rated for continuous high-pressure applications.

• Weather-resistant construction for surface or underground installation
• Can be left outdoors through seasonal cycles without premature failure
• Pressure rated up to 60 PSI for intermittent supply, not continuous pressure

What performance benefits will I see using drip tubing over sprinklers?

Drip tubing delivers water directly to the root zone, which minimizes evaporation and runoff compared with overhead sprinklers. That concentrated delivery can reduce overall water use and help keep paths and plant foliage drier, lowering maintenance and weed encouragement around irrigated plants.

• Potential water savings by cutting overspray and surface runoff
• Direct root-zone watering reduces water on walkways and foliage
• Less watering of surrounding soil can decrease weed growth in planted areas

How do I prepare and connect MIXC tubing for leak-free joints?

Before assembling, soften the tubing end in hot water for about 10 seconds to make barbed fittings go on more easily and seal better. Ensure cut ends are square and push tubing fully onto fittings until seated; use clamps where needed on higher-pressure runs.

• Soak tubing end in hot water 10 seconds for easier fitting insertion
• Make clean, square cuts and push fully onto barbed connectors
• Use fittings or clamps for secure joints on runs near the 60 PSI limit

Who this is for: MIXC 400FT 1/4" irrigation tubing is ideal for homeowners, gardeners, and landscapers building or expanding micro-irrigation systems. It suits vegetable beds, flower boxes, containers, shrubs and tight planting areas where flexible routing and precise emitter placement matter. Choose this tubing if you need a long, weather-resistant length of 1/4" distribution line compatible with most micro-irrigation components and prefer a balance of flexibility, durability and ease of installation.