Mister Landscaper 1/4-in Vinyl Tubing 100 ft — Black, Heavy‑Walled UV‑Inhibited Drip Line

Mister Landscaper 100-foot 1/4-inch black vinyl tubing is a flexible, heavy-walled drip irrigation line used to extend or repair micro-spray and dripper assemblies from 1/2-inch poly or a faucet.

Built for landscape and garden irrigation, this commercial-grade vinyl tubing gives you a reliable, UV-inhibited supply line that resists weathering and stays flexible across seasons. At 100 feet long and with thick walls, it’s intended for use as an inline connector from faucets or 1/2-inch poly mainlines to 1/4-inch drippers, micro-sprays, and stake assemblies. The black finish helps reduce algae growth and blends into soil and mulch, while the tube’s construction tolerates both cold and warm climates when left above ground.

How does this tubing connect to existing drip systems?

The 1/4-inch tubing slips onto barbed fittings, micro-spray stakes, and 1/4" drippers, or it can feed from a 1/2-inch poly mainline using a barbed reducer or tee. Its inner diameter matches common 1/4" components, making retrofits and repairs straightforward without special tools.

• Fits standard 1/4" barbed fittings and drippers
• Connects to 1/2" poly using a barb reducer or adapter
• Easily trimmed with scissors or tubing cutters for custom runs
• Good for on-site repairs and quick extensions of existing lines

Will this tube hold up outdoors year-round?

This tubing is made from heavy-walled, UV-inhibited resins designed for prolonged outdoor exposure, so it withstands sunlight and seasonal temperature swings better than thin hobby tubing. While durable on the surface, avoid direct pressure beyond typical drip system operating ranges and check joints annually for wear.

• UV-inhibited material resists sun degradation
• Thicker walls reduce kinks and punctures
• Suitable for leaving on top of soil or mulch year-round
• Performs in both cold and warm climate conditions

What practical uses can landscapers and gardeners expect?

Use this tubing as a supply line from faucets, to route water from main poly lines to remote emitters, or to repair damaged 1/4" runs. Its length and flexibility make it ideal for complex beds, container gardens, greenhouse benches, and specialty plantings that need precise emitter placement.

• Extend drippers and micro-sprays up to 100 feet
• Create custom emitter spacing for irregular beds
• Repair cuts or add-on to existing 1/4" tubing networks
• Route water to hanging baskets, pots, or isolated shrubs

How should I cut, install, and maintain the tubing?

Cut cleanly with scissors or a tubing cutter, push onto barbs firmly, and secure with a small hose clamp if higher pressure is used. Flush the line before installing emitters to prevent debris blockages, and inspect fittings each season for tightness and wear.

• Trim with sharp scissors or a tubing cutter for clean ends
• Flush before connecting drippers to remove debris
• Use clamps for higher-pressure connections if needed
• Inspect annually for kinks, sun damage, or loose fittings

Who is this for: Mister Landscaper 100-ft 1/4-in black vinyl tubing is aimed at landscape professionals, irrigation installers, greenhouse managers, and avid gardeners who need a durable, flexible supply line for drippers and micro-sprays. If you’re repairing a damaged run, creating a custom emitter layout, or extending a mainline to remote plants, this tubing offers a cost-effective, weather-resistant solution that simplifies installation and reduces replacement frequency.