MaxAuto 20x2.0 Flat-Free Cart & Wheelbarrow Wheel Assemblies 2-Pack with 3/4" Bearings, Solid Rubber

MaxAuto 20x2.0 flat-free wheel assemblies are non-inflated 20-inch replacement wheels built for wheelbarrows, garden carts and small utility trailers, sold as a 2-pack with 3/4" bearings installed.

If you’re replacing worn pneumatic wheels or upgrading to maintenance-free rubber wheels, these MaxAuto 20x2.0 assemblies provide a ready-to-install option sized for common garden carts and wheelbarrows. Each wheel has a centered hub with a 2.44" hub length and comes with 3/4" bearings already installed (5/8" bearings included as spares). The solid-rubber construction eliminates pumping and blowouts while offering resistance to moisture and abrasion for routine yard tasks.

Will these wheels fit my wheelbarrow or garden cart?

Compatibility depends on matching four key dimensions: tire diameter and width, hub type and hub length, plus the bearing or axle diameter. Measure the original wheel dimensions or hub to be sure the 20x2.0 size and the 2.44" centered hub align with your cart’s axle setup.

• Tire diameter — nominal 20" (actual ~19.4").
• Tire width — listed 2.0" (actual ~1.9").
• Hub length — 2.44" centered hub.
• Bearing/axle — 3/4" bearings installed; 5/8" bearings included.

How durable are these flat-free tires for yard and utility use?

These non-inflated wheels are molded from solid rubber designed to resist abrasion and moisture without the aging and puncture risks of inner tubes. They provide lower rolling resistance than some other solid options and maintain performance across lawns, compacted dirt and hard surfaces.

• Solid rubber resists punctures and avoids blowouts.
• Designed for slow aging and reduced wear over time.
• Good rolling behavior on various yard terrains.
• Rated for a load capacity around 200 lbs per wheel.

What’s included and how do I install them?

Each package contains two complete wheel assemblies ready for installation. The bearings arrive installed in the hub; you’ll also find 5/8" bearings supplied if your axle requires that size. Installation typically requires removing the old wheel, sliding the new hub onto the axle, and securing with the axle fasteners.

• Included: two 20x2.0 flat-free wheels (one set = 2 pieces).
• Installed: 3/4" bearings; spare 5/8" bearings included.
• Quick swap replacement for matching hub/axle sizes.
• Use common hand tools to remove and replace wheels.

Are there any restrictions or important fit notes?

Verify all dimensions before purchase: tire size, hub length, hub type and bearing diameter must match your original wheel for proper fit. These wheels are designed for carts and yard equipment and are not intended for highway or high-speed vehicle use.

• Not for highway or motor-vehicle use.
• Confirm hub type (centered) and 2.44" hub length match your hub space.
• Check axle diameter to choose 3/4" or 5/8" bearing fit.
• Actual tire measures approx. 19.4" diameter and 1.9" width.

Who is this for: The MaxAuto 20x2.0 flat-free wheel pack is aimed at gardeners, landscapers and homeowners who want a low-maintenance replacement for pneumatic cart wheels. It suits anyone replacing damaged or leaky tires on wheelbarrows, garden carts and light-duty utility trailers, provided the hub and bearing dimensions match their equipment.