Marathon 13x5.00-6 Pneumatic Tire & 6" Steel Wheel Assembly - White Wheel, Turf Tread, 350 lb Capacity

Marathon's 13x5.00-6 pneumatic tire and pre-mounted steel wheel is a ready-to-install replacement designed for lawn mowers, offering a turf-friendly tread, 350 lb load capacity, and commercial-grade bushings.

This assembly pairs a 13x5.00-6 air-filled (tube-type) tire with a durable white steel wheel and a centered 3" hub, so you can swap a worn wheel quickly and get back to mowing. The tire uses a turf tread pattern to minimize grass damage while providing traction on lawns, and the wheel includes 3/4" oil-infused bushings for smoother rotation and longer service life. Intended for garden tractors, lawn and garden equipment, and utility carts, it arrives pre-mounted for easy installation.

How does this tire protect my lawn while giving traction?

The turf tread balances grip and ground preservation, spreading load to reduce rutting and surface damage. It’s shaped to roll smoothly at mowing speeds while maintaining enough bite for gentle inclines and wet grass.

• Turf-specific tread pattern minimizes tearing and scalping.
• Pneumatic design cushions bumps for gentler ground contact.
• Wide 13x5 profile distributes weight to limit compaction.

Will this wheel fit my mower and how do I measure for compatibility?

The assembly fits applications that accept a 6" rim and a 3" centered hub with 3/4" bushings. To confirm fit, measure rim diameter, hub offset, and axle/bushing inner diameter on your existing wheel and compare to the specs.

• Rim diameter: 6 inches—matches standard 6" rims.
• Hub: 3" centered hub that extends equally on both sides of the rim.
• Bushings: commercial-grade, 3/4" oil-infused bushings for the axle bore.

How durable is the Marathon 13x5.00-6 assembly and what maintenance is needed?

The steel wheel and oil-infused bushings deliver long-term durability under normal lawn use; the tire is a tube-type pneumatic that should be kept properly inflated. Regularly check tire pressure, inspect for cuts or punctures, and keep bushings lubricated or replaced if they show wear to extend service life.

• 350 lb load rating suitable for many residential and light commercial uses.
• Pre-mounted tire/wheel reduces handling damage during installation.
• Inflate with a manual pump; avoid overloading or highway speeds.

What tools and steps are needed to replace my old wheel with this pre-mounted assembly?

Replacement is straightforward: remove the old wheel’s fastener, slide the wheel off the axle, position the Marathon assembly, and secure it with the original nut or retaining hardware. No tire mounting tools are required since the tire comes already mounted to the wheel.

• Tools: wrench or socket matching your axle nut, jack or lift if needed for access.
• Check axle size; use 3/4" bushing-compatible axle or adaptors if necessary.
• Inflate to manufacturer-recommended PSI after mounting if pressure is low.

Who is this for: This pre-mounted Marathon 13x5.00-6 tire and wheel assembly is geared toward homeowners, landscapers, and small-hardware operators needing a fast, reliable replacement for lawn tractors, mowers, or utility carts. It’s especially useful when you want to minimize downtime—arriving ready to install with commercial-grade bushings and a turf-friendly tire for everyday lawn care.