Maitys Mist Maker Foggers 3-Pack — Ultrasonic Pond & Fountain Fogger with 12 LED Flashing Lights, Submersible 24V

Maitys 3 Pcs Mist Maker Foggers are compact ultrasonic fog generators that produce dense low-lying mist for ponds, fountains, Halloween displays and humidifying scenes.

These three small alloy mist makers come as a set so you can mist multiple water features or stage areas at once. Each unit uses ultrasonic vibration to atomize water into visible fog while the kit’s built-in flashing LED lights (as shown in the product title) add color and drama to parties, spooky setups, or decorative fountains. They’re designed for tabletop water displays, garden ponds, rockeries and seasonal props where a safe, electric mist effect is desired.

How do these mist makers create fog and what power do they use?

The Maitys mist makers use ultrasonic transducers to agitate water and turn tiny droplets into a visible mist without heat. They operate on a low-voltage electric supply (24V as specified) and are intended to be powered by the included plug-in adapter for continuous use.

• Ultrasonic vibration atomizes water into cool mist.
• 24V input for a steady, low-voltage effect.
• Designed for continuous submersion while operating.
• LED flashing (per title) adds colored illumination to the fog.

What surfaces and setups work best with these foggers?

They perform well in shallow ponds, decorative bowls, Halloween cauldrons, fountain basins and larger vases where the fog can spread across water or cascade over edges. For best results, place the fogger fully submerged and allow the mist to accumulate near the water surface so it spreads naturally across the display.

• Small garden ponds and rockeries.
• Indoor fountains, vases and decorative bowls.
• Seasonal props like cauldrons for parties and haunted displays.
• Use multiple units (3 included) for broader fog coverage.

How do I install and maintain a Maitys mist maker?

Installation is straightforward: plug in the adapter, fully submerge the unit in water, and switch it on. Regular care includes checking water level, avoiding dry-run operation, and gently wiping deposits from the alloy housing to maintain output.

• Always ensure the fogger is fully underwater before powering on.
• Keep water level adequate to prevent exposure of the transducer.
• Clean mineral buildup from the alloy housing as needed.
• Avoid blocking the central mist outlet with hands or debris while running.

What safety notes and limitations should I know?

The device is intended for decorative and humidifying uses only; it is not a medical humidifier. Do not operate when dry, and avoid placing your hand directly above the central mist outlet during operation. Battery life and run-time depend on usage patterns, and screen color representations may vary.

• Must remain submerged during operation to avoid damage.
• Do not touch the central fogging area while powered.
• Color tones can differ slightly between screens and actual LEDs.
• Run-time depends on frequency and duration of use.

Who is this for? The Maitys 3-piece mist maker set suits hobbyists, seasonal decorators, event planners and gardeners who want an affordable way to add mysterious fog and colored light to small water features or Halloween setups. Because the pack includes three misters, it’s also convenient for shared use, replacements or covering larger displays without complex plumbing or high-voltage installations.