M MINGLE Pressure Washer Jumper Hose 10 ft, 3/8 in Braided Whip — 4000 PSI Hot/Cold

The M MINGLE 10 ft Pressure Washer Jumper Hose is a 3/8" braided whip hose that links your pressure-washer pump to a hose reel, rated for up to 4000 PSI and safe for hot or cold water up to 100°C (212°F).

This compact jumper hose reduces strain on your pressure-washer pump by giving a short, flexible connection between the machine and a nearby hose reel. Built with a braided steel-wire jacket and quick-connect fittings, it delivers a kink-resistant, easy-to-handle link that suits many pressure-washer setups and both hot and cold water use.

How durable is this whip hose under heavy use?

The M MINGLE jumper hose uses an upgraded high-tensile steel-wire braid to resist abrasion and repeated coiling. It is designed not to form permanent kinks and holds up to frequent dragging and rolling during routine cleaning tasks.

• Maximum working pressure: 4000 PSI for regular operation
• Burst pressure: up to 16,000 PSI for safety margin
• Outer braid for abrasion resistance and dimensional stability
• Non-marking cover to protect surfaces when pulled across decks or vehicles

Will it fit my pressure washer and reel?

The hose uses standard 3/8" quick-connect female socket and 3/8" plug fittings that are compatible with most pressure washers and hose-reel connections. That makes attaching and detaching fast and tool-free for a wide range of machines and reels.

• 3/8" quick-connect female socket on one end
• 3/8" quick-connect plug on the other end
• Designed to bridge the pump outlet and nearby hose reel
• Works with reels and pumps that accept 3/8" quick connects

Can I use this whip hose with hot water and different flow rates?

Yes — the M MINGLE jumper hose is rated for both hot and cold water up to 100°C (212°F), so it will handle typical hot-water cleaning cycles. It supports flow rates between about 2.5 and 5 gallons per minute, covering most consumer and light-commercial pressure washers.

• Temperature limit: up to 100°C (212°F)
• Flow range: approximately 2.5–5 GPM
• Suitable for hot-water-compatible pumps and reels
• Short 10 ft length reduces pressure loss between pump and reel

Why choose a 10 ft jumper hose instead of a longer main hose?

A 10 ft whip hose is intended as a pump-to-reel connector rather than the primary cleaning line. Its short length minimizes hose weight at the pump, reduces wear on the pump outlet, and makes rewinding onto a reel easier while preserving water pressure for the work hose.

• Reduces strain on the pressure-washer pump outlet
• Makes manual or automatic reel winding simpler and neater
• Keeps the heavier, longer cleaning hose off the pump
• Compact for storage and transport with the machine

Who this is for: The M MINGLE 10 ft Pressure Washer Jumper Hose is aimed at homeowners, detailers, and small-service operators who use a hose reel with their pressure washer and need a reliable, heat-tolerant connector. If you want a short, robust link that resists kinking and handles hot-water tasks while fitting common 3/8" quick-connect systems, this whip hose is a practical accessory to protect your pump and streamline reel use.