LNEZCDB 3-Way Brass Hose Splitter for 3/4" GHT Faucet — Full-Flow Ball Valves, Independent Shut-Offs

This LNEZCDB 3-way hose splitter is a solid-brass outdoor faucet adapter that lets you run three hoses from one 3/4" GHT spigot while keeping full flow and independent shut-off control.

Made from precision-cast C38500 brass and engineered for rough use, this garden hose split connector is designed to deliver high flow, reliable sealing and long service life. It weighs 1.62 pounds, features a large 0.59-inch ball valve bore to reduce restriction, and uses heavy wall construction to withstand pressure and mechanical stress encountered in irrigation, car washing and multi-hose outdoor setups.

How much water flow can I expect from each outlet?

The splitter prioritizes flow by using a large ball valve and a 0.6-inch inner diameter. Each outlet has a tested flow rate of roughly 3.38 pounds per second when connected to a standard 3/4" supply, giving near full-flow performance compared with smaller splitters.

• 0.59-inch ball valve bore for low restriction
• 0.6-inch inner diameter throughout the body
• Flow rate tested at 3.38 lb/s per outlet
• Designed for 3/4-inch GHT standard garden faucets

Will this splitter survive outdoor stress, temperature changes and heavy fittings?

Yes — the unit passed repeated destructive and sealing tests including torque, bending and tensile forces, then a sealing test at 17.6 psi without damage. It also endured temperature cycling from -40°F to 176°F without cracking or leaking under controlled conditions.

• Constructed from heavy-duty C38500 brass for corrosion resistance
• Shell thickness and wall strength validated under high mechanical loads
• Temperature-tested from -40°F to 176°F; drain below -4°F to avoid ice damage
• Replaceable O-ring design restores sealing if needed

How easy is it to operate and fit with other garden equipment?

The splitter installs tool-free onto a standard U.S. 3/4-inch faucet thanks to a thickened hex inlet, and each outlet has an extra-long ergonomic metal handle for smooth valve operation. A 1.6-inch spacing between outlets and a vertical 90° male thread reduce stress on hose timers and other attachments.

• 2.31-inch extra-long curved metal handles for improved grip
• 1.6-inch outlet spacing to accept larger timers and attachments
• Vertical 90° male thread lowers gravitational stress on connectors
• Tool-free inlet installation for quick setup

What maintenance or installation tips improve durability?

Simple steps will extend service life: hand-install the hex inlet to avoid over-torquing, drain the unit before freezing temperatures, and swap O-rings if leaks appear after seasonal storage. The product was tested under high loads, but routine care prevents avoidable damage.

• Hand-tighten inlet; avoid excess torque on fittings
• Shut off and drain before temperatures drop below -4°F
• Keep spare O-rings on hand for quick resealing
• Use the vertical thread and spacing to minimize connector strain

Who is this for: gardeners, landscapers, RV owners and homeowners who need to run multiple hoses or irrigation devices from a single 3/4" outdoor spigot will appreciate this heavy-duty brass splitter. It’s aimed at anyone who wants higher flow than cheap plastic splitters provide, durable metal construction to resist weather and mechanical load, and easy, glove-friendly valve operation for routine outdoor chores.