Kokopro Poultry Heated Waterer Base 14-inch — 80W Thermostatic Chicken Water Heater, Frost-Free Coop Accessory

The Kokopro Poultry Chicken Water Heater is a thermostatically controlled 14-inch heated base that keeps plastic or metal waterers frost-free and drinkable through cold weather.

When temperatures drop, chickens can stop drinking because their water freezes or gets too cold. This 80-watt Kokopro heated waterer base slips under most 14-inch poultry waterers and automatically maintains a safe drinking temperature using an internal thermostat and low-wattage heating element. Designed for indoor or outdoor use in coops, it balances warmth, energy efficiency, and safety so you can keep birds hydrated without constant monitoring.

How does the thermostat protect water from freezing?

The unit contains an automatic thermostat that turns heating on and off based on ambient temperature. It activates below roughly 50°F and stops heating above about 68°F, preventing unnecessary operation and overheating. Note: the heater will only run when room temperature falls under 59°F to conserve energy.

• Automatic on/off cycles between ~50°F and ~68°F.
• Maintains water at a drinkable, frost-free range for poultry.
• Prevents continuous overheating and conserves electricity.

Will it work with my existing plastic or metal waterer?

This 14-inch Kokopro base was made to accommodate common plastic and metal poultry waterers. The low-profile, non-conductive design sits under the water container and transfers gentle heat without altering the water quality. It fits most standard 14-inch bases and stabilizes larger vessels when placed on a flat surface.

• Compatible with most 14-inch diameter poultry waterers.
• Low-profile design supports plastic and galvanized metal bowls.
• Stable, non-slip base keeps the waterer steady in the coop.

Is the Kokopro heater energy efficient and safe?

The heater uses an 80-watt element that warms quickly but draws modest power compared with high-wattage alternatives. Its thermostat cycles reduce runtime, and a non-conductive heated surface protects birds from electrical hazards. A 5.5-foot peck-resistant cord helps prevent chickens from damaging the cable, improving long-term safety and reliability.

• 80W low-power element for quicker warm-up and lower bills.
• Non-conductive heated base prevents shock risks for poultry.
• 5.5 ft peck-resistant cord protects wiring from curious birds.

How do I install and maintain the heated base?

Installation is straightforward: place the Kokopro heated base on a flat surface, set your 14-inch waterer on top, and plug into a grounded outlet. Routine maintenance involves checking the cord for damage, keeping the base clean, and stopping use if it appears not to be heating. Contact Kokopro support if you notice any functional issues.

• Set on level ground, center the 14" waterer over the base.
• Plug into a properly grounded outlet and avoid extension cords when possible.
• Inspect cord and base; clean with mild detergent and dry thoroughly.

Who is this for? The Kokopro Poultry Chicken Water Heater is intended for backyard chicken keepers, small farms, and homesteaders who need a reliable, low-energy solution to prevent water freezing in cold months. It suits owners of plastic or metal 14-inch waterers who want automatic temperature control, added safety features for peck-prone birds, and an easy-to-install accessory that reduces daily chores during winter.