Husqvarna 24" X-CUT C83S Skip-Tooth Chains — Pack of 3, 3/8" Pitch .050 Gauge for 84-Link Bars

Husqvarna X‑CUT C83S 24" skip‑tooth chains are OEM, high‑performance saw chains built for long bars that cut fast, stay sharp longer, and require less engine strain.

This three‑pack of genuine Husqvarna chains (SKU 585551284) is made for 24‑inch guide bars and features a 3/8" pitch with a .050" (1.3 mm) gauge and 84 drive links. The skip‑tooth layout spaces cutters farther apart so chips evacuate more easily, lowering the power needed from the saw and reducing the number of cutters to sharpen. Each chain ships pre‑stretched and factory‑sharpened so it’s ready to use right away; the product is produced in Sweden and supplied as an OEM replacement for compatible Husqvarna models and other saws that accept 3/8" pitch, .050" gauge, 84‑link chains.

How does a skip‑tooth C83S chain perform compared with full‑complement chains?

The skip‑tooth pattern on the C83S removes material more quickly with fewer cutters per revolution, which makes it well suited for long bars, heavier cutting, and jobs that produce lots of chips. Because there are fewer cutter engagements, it often runs cooler and asks less torque from the engine.

• Faster chip clearance reduces clogging on long bars.
• Lower cutter count means fewer filing sessions over time.
• Runs more efficiently on larger bars and higher‑load cuts.

What are the exact specifications I need to match?

Confirm your saw uses a 3/8" pitch, .050" gauge chain and that the bar requires 84 drive links. Those three numbers must match your bar and sprocket configuration to ensure proper fit and safe operation.

• Pitch: 3/8" (0.375")
• Gauge: .050" (1.3 mm)
• Drive links: 84 links

Is this chain ready to cut out of the box and what maintenance should I expect?

Yes — Husqvarna ships these chains pre‑stretched and factory‑sharpened so they are usable immediately. Routine maintenance includes correct tensioning, regular lubrication, and periodic sharpening or replacement of cutters; skip‑tooth chains still require attentive care because they are aggressive cutters.

• Factory sharpened for immediate use.
• Check and set tension before first cut and after initial break‑in.
• Keep bar groove and oil ports clean for consistent lubrication.

Are there safety or user experience differences to consider?

Skip‑tooth chains are powerful and remove wood very quickly, which is why they’re recommended for experienced operators. They tend to give a more aggressive bite and generally have less built‑in kickback mitigation than low‑kickback designs, so correct stance and handling are important.

• Best used by operators familiar with high‑performance chains.
• Expect quicker cutting but more reactive handling characteristics.
• Wear appropriate PPE and follow manufacturer safety practices.

Who is this for? This OEM Husqvarna C83S 24" skip‑tooth chain pack is aimed at professionals and skilled homeowners who run long bars for heavy limbing, felling, or production cutting and want an authentic, durable replacement that’s ready to work straight from the box. Choose this set if you need efficient chip clearance, lower engine load on longer bars, and the reliability of a Sweden‑made Husqvarna part; if you prefer a milder bite or are new to chainsawing, consider a more conservative chain profile.