Hayward SPX2610C Impeller replacement for Super II / Super Pump / Max-Flo pumps — direct-fit, restores flow & pressure

Hayward SPX2610C is a direct-fit replacement impeller engineered to restore flow and pressure for compatible Hayward pool pump models.

When a worn or damaged impeller reduces your pump’s performance, replacing it with the correct part brings circulation back to specification without replacing the entire pump. The SPX2610C impeller is manufactured to match Hayward dimensional and material standards and is compatible with a wide range of Super II, Super Pump, and Max-Flo SP2800/3000/2600 series models. It weighs about 7.5 pounds and is intended for straightforward swap-ins by technicians or experienced DIYers.

Which Hayward pump models will this impeller work with?

The SPX2610C is designed to fit many Super II SP3000 versions, Super Pump SP2600X series, and Max-Flo SP2800X models. Before purchase, confirm your pump’s model number on the housing or owner’s manual to ensure compatibility. Using a matched impeller keeps your hydraulic balance and motor load within manufacturer expectations.

• Super II SP3000 series: SP3007, SP3010, SP3015, SP3020, SP3025, SP3030 (and X versions)
• Super Pump SP2600X series: SP2600X5 through SP2621X25
• Max-Flo SP2800X series: SP2800X5 through SP2815X20

How difficult is installation and what tools are required?

Replacing the impeller is moderate difficulty: it usually requires removing the pump housing and volute, extracting the old impeller from the motor shaft, and threading the new impeller on. A socket set, screwdrivers, pliers, and possibly an impeller puller or strap wrench can speed the process. If you’re uncomfortable disassembling the pump or dealing with sealed shaft components, consult a pool technician.

• Common tools: socket set, flathead and Phillips screwdrivers, pliers
• Helpful tools: impeller puller, strap wrench, anti-seize lubricant
• Time estimate: 45–90 minutes for experienced DIYers

What performance changes should I expect after replacing the impeller?

Installing a new impeller typically restores original flow rate and head pressure lost to wear, helping filters and heaters operate efficiently. You may notice improved skimmer suction, faster filtration cycles, and steadier pressure readings on the pump’s gauge. Proper seating and correct model selection are essential to avoid cavitation or motor overloading.

• Improved water flow and consistent pressure
• More efficient filtration and chemical distribution
• Reduced risk of motor strain caused by imbalanced hydraulics

Are there maintenance tips to prolong the new impeller’s life?

Routine checks and simple maintenance keep the impeller running longer: clear debris from skimmer baskets, clean the strainer pot, and ensure seals are intact to prevent water intrusion to the motor. Periodic inspection for cracks or erosion will catch issues early, and replacing worn gaskets or bearings prevents secondary damage. Use manufacturer-recommended parts and torque specifications when reassembling.

• Keep skimmer and pump baskets free of debris
• Inspect seals and bearings during each service interval
• Follow Hayward torque specs and use compatible gaskets

Who is this for: The Hayward SPX2610C impeller is for pool owners and service professionals who need a reliable, OEM-compatible replacement for Super II, Super Pump, or Max-Flo Hayward pumps. It’s suited to those restoring lost pump performance without replacing the entire motor or pump assembly, and for technicians stocking a common repair part for routine maintenance or mid-season repairs.