Hayward SPX0710X32 Side-Mount Replacement Valve for S200/S240 Sand Filters — Direct-Fit, Durable Flow Control

Replacement side-mount valve engineered to fit Hayward S200 and S240 series sand filters and compatible multiport assemblies, restoring reliable flow control and filter function.

If your pool’s sand filter valve is cracked, leaking, or no longer holding position, the Hayward SPX0710X32 side mount valve offers a direct-fit replacement for many Hayward sand and multiport filter systems. This robust, factory-style valve re-establishes correct plumbing alignment and handle operation so your filtration cycles (filtering, backwash, rinse, waste, recirculate, closed) perform as intended. At 5.4 pounds, it balances durability with straightforward installation for most standard residential setups.

Will this valve fit my Hayward S200 or S240 sand filter?

Yes — the SPX0710X32 is manufactured specifically for Hayward S200 and S240 series sand filters and is compatible with several Hayward multiport filter valves. Verify your model number and mounting orientation before buying to ensure the alignment and port locations match.

• Designed for S200 and S240 series sand filter housings
• Compatible with many Hayward multiport assemblies
• Side-mount configuration matches standard plumbing runs

How difficult is installation and what tools will I need?

Installation is typically straightforward for a homeowner comfortable with basic pool plumbing; it usually requires removing the old valve and bolting this unit into place. If your plumbing uses glued PVC, you may need to cut and solvent-weld new fittings or use adapters for threaded connections.

• Common tools: wrench set, screwdriver, PVC cutter, Teflon tape
• Check flange bolts, gasket condition, and handle orientation during install
• Professional plumbing help recommended if unsure about solvent welding or sealed joints

What are the practical benefits of replacing the valve?

Replacing a worn or leaking valve restores proper filtration cycles, prevents water loss, and improves pool water clarity by maintaining correct flow paths. A new side-mount valve also reduces strain on the pump and prevents cross-contamination between plumbing lines during backwash or waste functions.

• Stops leaks and eliminates intermittent handle slippage
• Returns correct multiport positions for efficient filtration
• Extends the life of the sand filter and associated plumbing

What should I check before ordering this replacement part?

Confirm your filter model (S200 or S240 series) and compare the valve’s port pattern and bolt holes to your current assembly. Note any pressure gauge, sight glass, or plumbing adapters you will need to transfer during installation.

• Match model numbers and side-mount orientation
• Inspect existing gasket and flange hardware for replacement
• Measure port spacing to ensure plumbing alignment

Who is this for: The Hayward SPX0710X32 side mount valve is intended for pool owners, maintenance pros, and service technicians who need a reliable, OEM-style replacement for Hayward S200 and S240 sand filters or compatible multiport valves. Choose this valve when you want a direct-fit part to restore proper valve positions, stop leaks, and keep your filtration system running efficiently. If you’re uncertain about fit or installation, consult your filter manual or a licensed pool technician before purchasing.