GICOOL 15x6.00-6 Front Tire & Wheel 2-Pack — 3-inch Offset, 4-Ply Turf, Fits John Deere 100/300 Series

GICOOL 15x6.00-6 tubeless front tire and wheel 2-pack: a 15" diameter, 6" wide, 6" rim, 3" offset assembly with 3/4" bearings built for lawn tractors and riding mowers.

These replacement front tires and wheels come as a matched pair engineered for common 100 and 300 Series John Deere riding mowers and many other lawn tractors. The assemblies combine a turf-friendly 4-ply rubber tire with a thickened welded steel rim and double-sealed bearings to provide reliable rotation, load capacity, and reduced turf marking. Before ordering, verify the tire size on your sidewall and measure hub and bearing dimensions to ensure compatibility.

Will these fit my mower model and hub dimensions?

Compatibility depends on matching three key measurements: tire size, rim diameter, and bearing/hub hole. These assemblies are 15x6.00-6 with a 6" rim and a 3/4" bearing hole; the hub offset is 3".

• Confirm existing tire sidewall reads 15x6.00-6.
• Measure hub bearing hole: 3/4" (0.75 inch).
• Check wheel offset: 3" to match spindle clearance.
• Commonly fits John Deere 100/300 Series front applications when dimensions match.

How durable and lawn-friendly are these tires?

The tires are 4-ply rubber with a turf-S tread pattern designed to offer traction while minimizing turf damage. The high rubber content resists cracking and wear for typical residential mowing conditions.

• 4-ply construction for puncture resistance and longevity.
• Turf-S tread reduces grass scarring and improves directional control.
• Tubeless design simplifies mounting and repair compared with tube-type wheels.
• Dynamic load capacity rated at 365 lbs per wheel for balanced front-end support.

What are the wheel and bearing features I should know?

The wheel is a single-piece, high-strength welded steel rim designed to resist bending and separation under load. Bearings are double-sealed carbon steel for smoother rotation and longer life in outdoor conditions.

• Single-piece welded steel rim prevents separation from the hub.
• Double-sealed carbon steel bearings protect against dirt and moisture intrusion.
• 3/4" bearing hole for standard lawn tractor spindles that accept this size.
• 3" offset hub helps with proper wheel alignment and clearance on many mower front ends.

How do I install and maintain these front tires?

Installation requires removing the old wheel from the spindle, confirming bearing fit, and mounting the new assembly. Routine maintenance includes checking tire pressure (if specified by your mower), inspecting bearings for wear, and keeping rims free of bent edges.

• Use appropriate safety procedures and tools to remove spindle fasteners.
• Slide wheel onto spindle and secure with original washers and nut torques.
• Inspect seals and bearings annually or if you notice play or rough rotation.
• Replace both front wheels as a pair for even handling and wear.

Who is this for: This GICOOL 2-pack is intended for homeowners and maintenance technicians replacing worn or damaged front tires on riding mowers and small tractors, especially owners of John Deere 100 and 300 Series or any machine that matches the 15x6.00-6 size, 6" rim, 3/4" bearing, and 3" offset. Choose these wheels if you want a lawn-friendly tread, reinforced steel rims, and sealed bearings for reliable front-end performance.