GICOOL 13x5.00-6 Tiller Tire & Wheel Assembly — 3/4" Axle, 3-1/8" Centered Hub, Super-Lug Tubeless

GICOOL 13x5.00-6 tiller tire and wheel is a heavy-duty, tubeless replacement assembly with a 3/4" bearing bore and a 3-1/8" centered hub designed for garden tractors, tillers, and trenchers.

This complete wheel and tire combo fits popular small garden machines and offers a robust lug tread for traction when turning soil, pulling small implements or working on uneven ground. The assembly arrives ready to mount; verify your old tire's size and hub specs before ordering to ensure compatibility with Craftsman, Troy-Bilt and similar brands.

Will this wheel fit my tiller or small tractor?

The key measurements to match are the tire size (13x5.00-6), bearing bore (3/4" axle), and the centered hub length (3-1/8" / 80mm). Also check for pin-hole placement and diameter to align the wheel on your axle or pin-style shaft. If those parameters match, this assembly will bolt right on as a direct replacement.

• Tire size: 13x5.00-6 (13" diameter, 5" width)
• Bearing/axle bore: 3/4" (0.75")
• Centered hub length: 3-1/8" (80mm)
• Pin-hole diameter: 0.275" (7mm) with 0.39" (10mm) edge spacing

How does the tread perform on soil and lawn surfaces?

The aggressive super-lug pattern is engineered to bite into loose soil and dig for traction without excessive turf scuffing when used carefully. Its sharp-angled knobs help with both pulling and pushing forces common during tilling or trenching operations. The 4-ply construction balances load capacity and puncture resistance for typical garden workloads.

• Sharp-angled lugs for improved traction in soil
• 4-ply sidewalls for added durability and load support
• Suitable for light fieldwork, beds, and trenching tasks
• Tubeless configuration reduces pinch-flat risk when mounted correctly

What should I know about installation and maintenance?

Mounting this tubeless tire requires aligning the hub and pin holes, seating the bead, and following the directional mounting marks printed on the tire. Use proper inflation pressure recommended by your equipment manufacturer and check pin-hole alignment before tightening hardware. Regular inspection for cuts, proper inflation and hub wear extends service life.

• Follow tire's directional arrows when mounting
• Confirm pin-hole alignment with axle before securing
• Inflate to equipment-specified pressure; avoid over/under inflation
• Inspect bead, lugs, and hub periodically for damage

Can this product replace original Craftsman or Troy-Bilt wheels?

This GICOOL assembly is compatible with many Craftsman and Troy-Bilt models when the size and hub measurements match your OEM part. Because small variations exist between models and years, cross-check your original wheel's dimensions and pin-hole spacing. Where measurements align, it serves as a cost-effective replacement option.

• Common fit for many Craftsman & Troy-Bilt tillers and trenchers
• Measure old tire and hub to confirm exact match
• Works as a one-piece replacement for standard 3/4" axle shafts
• Sold as a 1-pack wheel and tire assembly

Who is this for: This wheel and tire assembly is aimed at homeowners, gardeners, landscapers and light-farm operators who need a reliable, replacement 13x5.00-6 tiller tire with strengthened sidewalls and an aggressive lug pattern. Choose this GICOOL 1-pack if you have a 3/4" axle and a centered hub around 3-1/8" (80mm), and you want a tubeless, heavy-duty option for seasonal tilling, trenching or small tractor tasks.