Geowaky 2.5" x 100 ft Pool Backwash Hose — Blue Reinforced PVC, Heavy-Duty 90 PSI with Clamps

Geowaky's 2.5" x 100 ft reinforced PVC lay-flat pool backwash hose is a heavy-duty water discharge hose designed to connect to 2.5" filter outlets and handle up to 90 psi without leaking or bursting.

This durable blue hose was built to move large volumes of pool, sump, or pump water safely and reliably. At 100 feet long with a 2.5-inch inside diameter and a flat width of 4.14 inches, it fits most 2.5" hose adapters and many 2" schedule 40/80 PVC pipe installations (maximum outside pipe diameter 2.5" without an adapter). The reinforced PVC construction and included metal clamps make installation quick and reduce the chance of leaks during backwash, draining or temporary discharge jobs.

How will this hose connect to my pool filter or pump?

The Geowaky backwash hose connects directly to 2.5" filter outlets and most 2" PVC pipes when an adapter isn’t required. Each hose ships with two metal clamps so you can clamp the hose securely to the outlet or pipe and start discharging immediately.

• 2.5" inside diameter fits most 2.5" filter ports and adapters
• Flat width 4.14" when laid flat to pass beneath walkways and gates
• Two included metal clamps for a firm, leak-resistant seal
• Adapters recommended if pipe outside diameter exceeds 2.5"

What conditions and uses is this hose suitable for?

This hose is made for a wide range of outdoor water-discharge tasks: backwashing sand filters, draining above-ground pools, diverting sump or sewage pumps, and temporary site dewatering. The PVC lay-flat design resists kinking and packs down for convenient storage between uses and seasons.

• Designed for pool filter backwash, pool draining, sump and trash pumps
• Works in residential, agricultural, industrial, and construction settings
• Built to withstand normal outdoor weather across all seasons
• Lay-flat profile reduces trip hazards and simplifies routing

How durable and leak-resistant is the Geowaky discharge hose?

Reinforced PVC and a consistent coating give the hose strong puncture and pressure resistance. Geowaky rates the hose for up to 90 psi working pressure, and reinforcement helps prevent bursting and leaks during heavy flow or temporary higher pressures.

• Heavy-duty reinforced PVC resists punctures and abrasion
• Uniform coating reduces the risk of weak spots or delamination
• Rated to handle up to 90 psi working pressure under normal use
• Metal clamps included to secure leak-free connections

How do I store, transport, and care for the hose?

The lay-flat construction makes rolling and storing simple — roll it up after draining and keep it in a cool, shaded spot to extend its life. Rinse away chlorine or debris after pool use and avoid long-term exposure to sharp objects or prolonged sunlight when possible.

• Drain fully and roll flat for compact storage
• Rinse after use to remove chlorine, sand, or debris
• Store in a shaded, dry place to reduce UV degradation
• Inspect clamps and hose ends before each use

Who is this for: The Geowaky 2.5" x 100 ft backwash hose is for pool owners, landscapers, contractors, and anyone needing a reliable, long discharge hose for backwashing, draining, or temporary dewatering. If you need a long, flexible hose that connects to standard 2.5" outlets, resists kinks, and comes with clamps for a fast, secure fit, this hose is a practical choice.