GasSaf 3/4 in Blended Fire Glass Beads, 10 lb — Cobalt & Caribbean Blue, Tempered Decorative Fire Pit Glass

GasSaf 3/4 inch blended fire glass beads are tempered decorative glass designed to replace gas logs and transform propane or natural-gas fire pits with vibrant, heat-safe color and sparkle.

These 10-pound mixed-color fire glass drops from GasSaf combine cobalt blue, Caribbean blue, and crystal clear luster pieces in a uniform 3/4" size. They are tempered for safety and durability and intended for use with outdoor fire pits, fire bowls, and indoor gas fireplaces where manufacturer guidelines allow media substitution. Because the beads are kiln-tempered, they won’t melt or emit smoke or odors when used with proper gas fuel, and their jewel-like finish creates a clean contemporary look compared with soot-prone logs.

How will these glass beads change the look of my fire pit?

Replacing or topping existing burner media with GasSaf fire glass turns flames into a sparkling display that reflects through the glass surfaces. The blended color mix offers depth — deep cobalt provides contrast while Caribbean blue and clear pieces increase brightness for a multi-dimensional flame bed.

• Creates a gem-like, reflective surface that enhances flame color.
• Blended palette adds visual depth compared with single-color media.
• Uniform 3/4" size promotes consistent flame patterns across the burner.

Is this fire glass safe to use with my propane or natural gas setup?

GasSaf beads are kiln-tempered to withstand high temperatures used in gas appliances and will not emit smoke or odors when installed correctly. Always follow your appliance manufacturer's instructions about approved media and clearances; do not use these beads on wood-burning fires.

• Tempered glass resists shattering and thermal stress during normal gas use.
• Non-combustible and free from coatings that could off-gas under heat.
• Designed specifically for propane and natural gas fire pits and fireplaces.

How much fire glass do I need and how do I install it?

A 10-pound bag of 3/4" beads covers a moderate area depending on burner size and desired depth; most decorative installations require a single layer or a shallow covering to allow proper gas flow. Installation is simple: turn off the gas, remove old media if needed, position the burner correctly, then spread the glass evenly to manufacturer-specified depth.

• 10 lb bag works well for small to medium fire bowls or as a top layer over lava rock.
• Keep a 1–2" clearance above the burner openings unless the appliance manual specifies otherwise.
• Use a non-metal scoop and rinse beads only if recommended by the manufacturer.

Will the color and finish last outdoors?

GasSaf fire glass uses a premium tempering process to preserve consistent color and a jewel-like finish through repeated heating cycles. The beads are designed to resist fading, cracking, and discoloration under normal outdoor conditions when used with gas appliances, so they retain their sparkle season after season.

• Tempering locks in color and improves long-term thermal resistance.
• Do not expose to direct wood-burning flames or abrasive cleaning to avoid surface scratches.
• Suitable for decorative uses beyond fire pits — planters, water features, and backyard accents.

Who is this for? GasSaf 3/4" blended fire glass beads are for homeowners and designers seeking a low-maintenance, visually striking alternative to traditional gas logs. Choose this product if you want a modern, reflective flame bed that stays clean-looking, if you operate a propane or natural gas fire pit or fireplace that permits glass media, or if you’re refreshing an outdoor living area with jewel-toned accents. Not intended for wood-burning fireplaces or unapproved appliances; always consult your appliance manual or installer before changing burner media.