FAHKNS 20x8.00-8 Rear Tire and Wheel Assemblies — 2PCS Tubeless 4-Ply, 3/4" Bore 3.5" Offset

FAHKNS 2PCS 20x8.00-8 rear tire and wheel assemblies are tubeless, 4‑ply lawn mower tires with a 3/4" borehole, 3.5" offset hub and 3/16" keyway designed to replace worn rear wheels and handle up to 905 lbs each.

These complete wheel assemblies give you an easy way to restore traction, stability, and load capacity to riding mowers, garden tractors, and similar outdoor equipment. Built from all‑season natural rubber with a multi‑ply carcass, the assemblies are intended for varied terrain — from flat turf to light brush and gravel paths. Each set contains two fully assembled 20x8.00-8 wheels so you can swap both rear sides quickly and get back to work.

Will these FAHKNS assemblies fit my mower?

Compatibility is determined mainly by borehole diameter, hub offset, and keyway size. These assemblies have a 3/4" bore, 3.5" offset hub and a 3/16" keyway — measure your existing wheel bearings and hub to confirm a match before ordering.

• Check your current wheel’s bore diameter against 3/4".
• Confirm hub offset is close to 3.5" for proper clearance.
• Verify your axle uses a 3/16" key or keyway for secure mounting.
• Compare tire size to 20x8.00-8 printed on your existing tire sidewall.

How durable are these tires for regular lawn care?

They are engineered as 4‑ply tubeless units using all‑season natural rubber to balance flexibility and wear resistance. The construction helps absorb shocks and resists punctures better than single‑ply options, making them suitable for frequent mowing and light off‑lawn tasks.

• 4‑ply construction for added sidewall strength.
• Tubeless design reduces pinch flats and improves ride comfort.
• All‑season rubber compound for year‑round performance.
• Rated for a 905 lb (410 kg) maximum load per tire.

What does installation involve and what tools will I need?

Each package includes two assembled tires and wheels ready for mounting; typical installation requires removing the old wheels, sliding the new assemblies onto the axle, and securing the key and hardware. Light greasing of bearings before mounting helps reduce friction and extends service life.

• Tools: socket set, wrench, hammer or mallet for key seating.
• Grease bearings lightly before installing wheels.
• Use the 3/16" key to lock the hub to the axle securely.
• Torque axle nut to your mower manufacturer’s specification.

What performance can I expect on different terrains?

The tread and rubber formulation are intended for general lawn and garden use, offering good traction on grass, packed dirt and light gravel. They are not designed for heavy off‑road abuse but will reliably handle typical yard chores and uneven ground encountered during routine maintenance.

• Good traction on turf without excessive ground disturbance.
• Stable handling on compacted dirt and gravel drives.
• Shock absorption reduces vibration over rough patches.
• Not recommended for continuous rock or heavy off‑road use.

Who is this for? If you own a riding lawn mower, garden tractor, or similar outdoor machine that uses 20x8.00-8 rear wheels and needs robust, ready‑to‑mount replacements, these FAHKNS assemblies are a practical choice. They suit homeowners and light commercial users who want a straightforward swap with durable, tubeless construction and a high load rating. If your mower requires a different bore size, offset, or keyway, measure first; if you need heavy-duty off‑road tires, look for specialized aggressive tread options instead.